Tapo H200
Idéal pour : Idéal pour centraliser sans abonnement les enregistrements de deux à quatre caméras Tapo compatibles.
En bref : Selon les utilisateurs Reddit, le Tapo H200 constitue une solution abordable pour centraliser localement les enregistrements de quelques caméras Tapo. Ses clips d’événements très courts, sa limite de quatre caméras et des problèmes ponctuels de firmware ou de carte microSD restent ses principales faiblesses.
Au-delà de ce modèle, la marque Tapo (toutes gammes) recueille 37 % d'avis positifs sur 1023 utilisateurs Reddit. Ce signal marque ne compte pas dans la note du modèle ci-dessus.
Points forts
Bon rapport qualité-prix
7 1
« just buy a cheap h200 hub and you will have all records » Voir l’avis
« Literally just get a $40 tapo h200 hub and stop complaining » Voir l’avis
« I think Ill just get another H200 (CAD$36) for my 2 x C645D's and call it a day, as I have plenty of SD Cards lying around. » Voir l’avis
Utilisable sans abonnement
4 2
« just buy a cheap h200 hub and you will have all records » Voir l’avis
« Literally the point of the h200 and h500 hub » Voir l’avis
« Don't forget to put a micro SD card in the hub so you can record to it rather than one in the doorbell. » Voir l’avis
Points faibles
Détection peu fiable
0 4
« I told them to change it for hubs, it's using local WiFi so I don't understand for that limitation at all, it's not using their servers at all. » Voir l’avis
« H500 has better built in ai features that allow your cameras to have better facial recognition or recognition for vehicles or animals or whatever. » Voir l’avis
« The fact that continuous recording is only useful with the hubs, which I do use, and the recorded events detected aren't functional, makes them pretty much useless.. » Voir l’avis
| Critère | Note /10 | Ce qu'en dit le consensus |
|---|---|---|
| Détection | 0.0 | Les utilisateurs Reddit jugent les clips d’événements trop courts et parfois insuffisants pour comprendre toute la scène. |
| Fiabilité | 4.4 | Les avis sont partagés, certains signalent des mois de stabilité avec une carte haute endurance, d’autres des déconnexions ou pertes d’enregistrement après redémarrage. |
| Application | 5.0 | L’application facilite les automatisations, mais le déploiement irrégulier des firmwares suscite de nombreuses critiques. |
| Installation | 4.7 | L’installation est souple sur un réseau local, mais peut nécessiter Ethernet ou une mise à jour selon la version du hub. |
| Prix | 7.5 | Le H200 est largement considéré comme économique, avec pour contrepartie une capacité limitée à quatre caméras. |
| Utilisation sans abonnement | 6.2 | Le stockage local sur microSD permet généralement d’enregistrer sans abonnement, sous réserve de compatibilité. |
| Autonomie | 9.6 | Une liaison dédiée avec certaines caméras sur batterie est présentée comme moins énergivore. |
Avis Reddit
62 avis analysés · Positifs 29 Neutres 11 Négatifs 21
-
Chris_N_run 🇫🇷
1 commentaire analysé
-
SugarrrSugarr 🇬🇧🌐
16 commentaires analysés
r/Tapo · Rich notifications just buy a cheap h200 hub and you will have all records
r/Tapo · Tapo cameras: Is there a way to set the duration of motion-triggered recordings? I told them to change it for hubs, it's using local WiFi so I don't understand for that limitation at all, it's not using their servers at all. Because of it I'm forced to use continuous recording, I will never trust these short clips. It should be at least 30 seconds for the shortest clip, or the same length as for camera SD card events.
r/Tapo · Tapo cameras: Is there a way to set the duration of motion-triggered recordings? not possible to change the duration, it's designed like that you are lucky it's 15 seconds for h500, because for h200 it's 9 to 10 seconds only yes I have confirmation from support some time ago
r/Tapo · H200 killing micro SD card I have used a Samsung Pro Endurance for over a year in a Tapo H200 with no issues.
r/Tapo · Tapo H200 event recordings are too short and play in fast forward I agree that events are too short, but with newest firmware which fixed almost everything and 24/7 that hub is perfect for only 20-25 pounds to save videos just in case someone steal your camera.
r/Tapo · H500 power outage requires HD format it's the same with h200 hub sometimes after power outage, the worst part of it is, that you won't get any notification that you need to format your card again, and if you don't have cards in cameras nothing will be saved
r/Tapo · Tapo H200 sdcard initialising issue every few weeks It must be a power outage, or the hub restarted, or the router rebooted, and after that the hub sometimes just stops responding, and the only way is to format a card. What firmware do you have? With beta firmware, I haven't experienced it yet.
r/Tapo · C120 event durations are too long yes, no other choice, 15 sec events are useless :d
r/Tapo · C120 event durations are too long yes, hubs events are designed from 10 to 15 seconds, that's why I use continuous recording, clips are too short with h200 and h500, you miss too much
r/Tapo · What is the hub for? you can, h200 and h500 are ap for cameras, WiFi backup option
r/Tapo · Question about Tapo H200 hub you have 3 connection options for h200 hub, sub GHz for sub GHz cameras, they have to be in range of your h200 hub. WiFi cameras need to be in range of your WiFi, WiFi cameras can use h200 WiFi back up option, they need to be in your h200 WiFi AP range.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned I have the newest beta firmware and hub 1.6 and still it's not possible to set up that hub without an ethernet cable. 1.6 means just an updated package, or instructions, hardware is the same.
r/Tapo · Single most frustrating piece of technology So what you can do, firstly separate your 5ghz WiFi and 2.4ghz, then set up your WiFi for channel 1, 6 or 11 for 2.4ghz. You can try WiFi backup function with h200 hub if the above wont help. Turn off seamless roaming if you have mesh at home.
r/Tapo · Tapo care cloud storage alternatives just buy h200 hub
r/Tapo · Tapo H200 network setup query yes, you can https://preview.redd.it/loji4mbo5a6h1.png?width=1080&format=png&auto=webp&s=8bc1bbf76d47c44ce5e099cc5d7f895d91a3746a
r/Tapo · Question about Tapo H200 hub yes, it will work
-
herqleez 🇬🇧
1 commentaire analysé
r/Tapo · How does the siren/alarm work on a H200 hub? Use the automation feature should be pretty straightforward
-
plump-lamp 🇬🇧
5 commentaires analysés
r/Tapo · Tapo care cloud storage alternatives Literally the point of the h200 and h500 hub
r/Tapo · Rich notifications Find us someone that does rich notifications and cloud clips for free. Do you have a server farm in your back yard? Literally just get a $40 tapo h200 hub and stop complaining
r/Tapo · Tapo hub H200 with C200 and C320WS cameras for recording ? H200 will work the same just have backup cards in the cameras Incase.
r/Tapo · H500 hub reviews? H200 can do all that for 1/3rd the price which is what I'm cross comparing
r/Tapo · H500 hub reviews? It's does. I'm actually a big wyze user, 15 cameras, home alarm system with 30 sensors, bulbs galore. I've been making my way towards other systems just not sure yet. I have 2 tapo cameras for testing, 2 reolink, and 1 eufy. I also have 20 or so tapo smart switches already. Just not sure the 3x price is worth it for the h500 hub vs the 200 yet. Basically h500 supports larger better storage and matter support and largely untested facial recognition. H200 has native home assistant integration h500 doesn't yet. Does the h500 do 24x7 recording with all those cameras or just events only? Are there other smart actions/automations you can do with the hub you can't do with individual cameras? Is there a centralized events area for clips from other cameras or are those still only visible by going to each camera?
-
Legitimate-Act-277 🇬🇧
1 commentaire analysé
r/Tapo · Who has secured an outdoor Tapo camera that's within arm's reach and how did you do it? I'm using a h200 all recording go there, as for protection... I've seen a lot of people put metal cage around them. Depends how far your will to go
-
That_Weather_1169 🇬🇧
4 commentaires analysés
r/Tapo · How to make all cameras and h500 sound an alarm at the same time?! You can do it with the h200 by adding individual smart actions for each camera, I can't see why the h500 would be any different.
r/Tapo · H200 - can this play different chime (and different volume) for different devices? If you have a smart bulb in the hall, you can programme a routine that turns it on for a set time if it is after sunset as well as making the hub chime. Don't forget to put a micro SD card in the hub so you can record to it rather than one in the doorbell.
r/Tapo · H500 vs Micro SD I would recommend getting a hub (h200 is fine) for any external cameras especially doorbells, simply because if someone steals the camera you still have footage, SD cards in internal cameras are fine. The hub also acts as another chime for the doorbell and is useful if you add switches etc later, I have a switch on the front door which turns on a hall light for 2 minutes when opened between sunset and sunrise.
r/Tapo · How does the siren/alarm work on a H200 hub? It should do everything you need, the volume is adjustable from very quiet to loud it has 5 alarm noises 10 doorbell rings and 4 other sounds. You can assign any sound/loudness to a particular camera using smart actions and use the automation to also turn on a smart bulb or smart socket with a radio etc. There is also the advantage of being able to store the videos in the hub rather than on a card in the camera.
-
Redararis 🇬🇧
1 commentaire analysé
r/Tapo · Single most frustrating piece of technology I have a h200 which stores data from 4 cameras, including a d235 and an external one which is just in wifi range. No problem for months now.
-
johnmgbg 🇬🇧
2 commentaires analysés
r/Tapo · What are great long-term local storage solutions for the TP-Link Tapo C120s besides Micro SD? Tapo H500 hub with WD Red. The Tapo H200 works really well when paired with high endurance SD cards.
r/Tapo · Storing videos outside cameras? Probably wait for the H200 to restock, or consider getting the H500. People are still waiting for the H500, as it's a significant upgrade over the H200. I can see that it's now available on Amazon.
-
Blue-Thunder 🇬🇧
8 commentaires analysés
r/Tapo · D235 and H200 or H500 Friend has the D235 and the H200 and it goes down so often it is useless. The doorbell is within 5 feet of the router as well, so loss of signal is complete BS. They also have their wifi networks split so the 5g and the 2.4 are separate. The H200 is also hardwired. They are also using a high endurance SD card.. I can't recommend the H500 as it's a joke for what you pay for it. Tapo needs to release a real NVR, and not just a hub.
r/Tapo · Tapo H200 event recordings are too short and play in fast forward See in my use case it's not as I have to use a motion box for pet detection at night as the C120 sucks, period. During the day it's phenomenal, but at night, a skunk or cat or raccoon or bear (bear was last year) could walk right in front of the extremely well lit camera, not even 6 feet away and it doesn't register as a "pet". It just misses them completely. I only found out as I have a wyze cam covering the same spot and it had every single pet detection while the C120 missed everything. I'd get a C246D, but my H200 doesn't have access to the firmware that will allow it to work..so I'd be back to SD card only recording. Does anyone know of any of the Tapo cameras that work with a concrete driveway and pets at night? You'd figure white background with plenty of light it would be able to see, but no..
r/Tapo · Tapo H200 event recordings are too short and play in fast forward I feel 15-20 seconds is far too short. I know you are not an employee and are just as frustrated.
r/Tapo · Tapo H200 event recordings are too short and play in fast forward I've commented before that my H200 does not see this firmware update. It's very, VERY frustrating. The fact that continuous recording is only useful with the hubs, which I do use, and the recorded events detected aren't functional, makes them pretty much useless.. What's the point of having event detection while you're doing continuous recording if the event playback is completely broken forcing you to go to the sd card to locate the time frame to see what actually happened.. I wish this would have been part of the documentation. Thanks SugarrSugarr.
r/Tapo · TAPO H200 It makes no fucking sense. I'm sorry Tapo reps, but this seriously needs to be addressed. The update is 2 months old. I should be seeing this update at this point, unless your update servers are being hosted on a smart fridge. If you can roll out updates to your routers as soon as they happen, there is no reason you can't roll out updates to your smart devices when they happen.
r/Tapo · TAPO H200 Well that's just bad. With an update this old it should automatically be sent to devices at this point, specially if it has security fixes and device compatibility fixes, which it does. People have bought the H200 expecting it to work with their cameras, and it won't because the device they bought is outdated, and no new updates are being pushed, even though they exist.
r/Tapo · TAPO H200 The official response I got from the forums was "If you need the update that badly, please contact support and they can try to force it out to you". What a joke. The update is 2 months old, it should not be "still rolling out."
r/Tapo · Setting up a security system If you want you can use the H200 just for the cameras, and use the H100 for the sensors. If not, the H200 will handle everything, and the H100 would not be used at all. https://www.tp-link.com/ca/home-networking/smart-hub/tapo-h200/
-
d7970 🇬🇧
5 commentaires analysés
r/Tapo · H200 - can this play different chime (and different volume) for different devices? Yes the time. Ringtone. Volume. And option to add if condition/s are met. I haven't tested it but it looks all there
r/Tapo · D235 and H200 or H500 Fyi the h200 with the high endurance SD card is still working well. Keeping fingers crossed. Touch wood 👍🤞
r/Tapo · D235 and H200 or H500 I have a D130 and H200. I was having alot of issues with the sdcard needing indiating suddenly and suddenly no recordings once it buggered up. I reached out to tp link who sent me a new h200 firmware but still issues persisted. I have since purchased a high endurance sd card (hopefully a legitamate one) as my last resort and see how it goes. Been going fine so far since Friday afternoon. Fingers crossed x
r/Tapo · H200 - can this play different chime (and different volume) for different devices? I take that back. I just checked in the smart automation. And I do believe its possible. Not sure about the volume of ring yet
r/Tapo · H200 - can this play different chime (and different volume) for different devices? I have a h200 hub. But unfortunately I dont believe this is achievable. Not that I've seen anyway.
-
nechronius 🇬🇧
1 commentaire analysé
r/Tapo · H200 - can this play different chime (and different volume) for different devices? I have a sensor that makes a "normal" chime during the day. During certain periods at night it screeches and makes some of the color Tapo bulbs turn on red. It's not THAT loud with the screeching, but loud enough for anybody who does belong know that someone is paying attention to the intrusion. You can set events based on Time periods. "When 4pm to 7pm, if door sensor detects door open, then play sound #3 at low volume for 3 seconds.". "When 7pm to 9pm, if door sensor detects open, then play sound #7 at high for 10 seconds.". "When "always", if door sensor is open more than 15 minutes, then send notification that door is still ope.". There's a lot of combinaitons of when-if-then actions you can create. Arguably if you're really going to get into this you may be better off switching to something like HomeAssistant which has better granularity and universally supports more things than just Tapo, but Tapo's actions are simple enough to set up and are still very flexible.
-
Super-Judge3675 🇬🇧
7 commentaires analysés
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned I am too lazy to take a screenshot, but cut the asshole attitude. According to the app it is possible for some version of this device, it even explains how it works (connect to a wifi router with name XXX\_XXX, etc. quite a bit of detail). And yes, it has been possible to do fully wifi setups of IOT devices for almost a decade by now (in the way explained above for non BT or NFC enabled devices). So I don't really know what is wrong with you that you make assumptions about other people being wrong. Cut it out, as you don't know really.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned Setup followed by upgrade of FW and re-set results in no updated behavior.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned The app shows that newer versions have a 100% wifi setup. Also the box says hw version 1.6 but the app reports it as 1.0. I don’t like being misled.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned The tapo app says that if it blinks orange and blue (or was it green) then it is doable, this means there is new versions that have that feature.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned It updated to 1.6 firmware but the new HW is new, it setups via wifi without the need of ethernet. Who knows what else the new HW has that the old doesn't. I am not risking on a new device. I want the newest HW they have if they are selling it for full price.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned no it is not. app reports hw 1.0 even though the box says hw is 1.6
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned I updated the fw and it still doesn’t work. App reports hw version 1.0 even though box says it’s 1.6. So it’s a hw version issue.
-
One-Bid-6488 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned That sucks. I would have done the same. Setup via ethernet only seems like the hardware is VERY old. I have had most devices allowing wifi setup for at least 5 years (probably more?). Seems Tapo is dumping old stuff on amazon.
-
iReadECGs 🇬🇧
1 commentaire analysé
r/Tapo · Storing videos outside cameras? H200 and H500 hubs are available on Amazon. I had poor video performance with the hubs for some reason. Went back to just recording to SD.
-
dorkmuncan 🇬🇧
6 commentaires analysés
r/Tapo · TAPO H200 Thanks, I've looked at the H500 and it seems very underwhelming for the price (CAD$199). I like the idea of the HDMI output for live viewing, but all my cameras are solar or battery, so live streaming is out of the question. I would need to factor in $ for a 2.5" drive as I don't have any spare and I have read the AI functionality is pretty spotty so the only benefit would be the additional device count. I think Ill just get another H200 (CAD$36) for my 2 x C645D's and call it a day, as I have plenty of SD Cards lying around.
r/Tapo · TAPO H200 Yep the dual-lens camera's taking up 2 slots makes perfect sense when you consider that they are essentially 2 different camera's. H500 doesn't really seem like a good value proposition for me, so I'll likely get multiple H200's as required.
r/Tapo · TAPO H200 My H200 firmware update came through today (BC, Canada). 1.6.5 Build 20260703 rel.7825 Finally I can add my C645D's onto the hub. My only complaint (although it makes sense), is the dual lens camera's take up 2 of the 4 camera slots per H200. I have 3 x C645D's, so will need to get another H200 to act as central recording for the other 2.
r/Tapo · TAPO H200 My H200 firmware update came through today (BC, Canada). 1.6.5 Build 20260703 rel.7825 Finally I can add my C645D's onto the hub. My only complaint (although it makes sense), is the dual lens camera's take up 2 of the 4 camera slots per H200. I have 3 x C645D's, so will need to get another H200 to act as central recording for the other 2.
r/Tapo · TAPO H200 It only makes sense if they found issues in the firmware and are working on a fix, but then why not put a release starting that? My tinfoil hat is pointing in the direction of they want me to be frustrated and just buy the Tapo H500 which is currently compatible with my new cameras. Which TBH, would be cheaper than getting local storage for my C645D's due to current pricing. Currently they are just sitting there watching my yard generating alerts. I do have some other camera's covering critical things.
r/Tapo · TAPO H200 I'm in the same boat, have 2 x C645D's I would like to link to my H200 for central recording. Guess we just wait?
-
Riley_TP-Link 🇬🇧
6 commentaires analysés
r/Tapo · Tapo H200 event recordings are too short and play in fast forward Yep, has shown for us too: [Download for Tapo H200 | TP-Link](https://www.tp-link.com/us/support/download/tapo-h200/#Firmware-Release-Notes) \- but this is happening as we speak, and I can see that something *different* is occurring. We will be able to learn more when the notes and version are posted. The firmware I mentioned above has the fixes in that update, along with 3 additional notes - one with a new device being supported (t150) and two additional fixes
r/Tapo · Current Tapo Smart Hub (H200/H500) Compatible Camera List There are two features at play here: Local Recording is the feature that allows you to record your footage to the app. Network Priority, or Wi-Fi Backup is the feature that would allow a camera to connect directly to the Hub's wireless connection. Take a look at this KB to see how the cameras can be added: [https://community.tp-link.com/us/smart-home/kb/detail/412836](https://community.tp-link.com/us/smart-home/kb/detail/412836)
r/Tapo · TAPO H200 Yes, the firmware has started to rollout in waves. [Latest H200 Update Adding Dual Lens Camera Storage, 24/7 Capture Support and More! - Smart Home Community](https://community.tp-link.com/us/smart-home/forum/topic/869410?page=1) And I think that this is unavoidable for dual-lens cameras. Even for other brands, the lenses are treated as two separate cameras - meaning that (if applicable) they have separate RTSP streams and will appear as completely separate devices in platforms like Alexa, Google, or SmartThings. For your network, it does sound like it may be worth looking at the H500's large form storage...
r/Tapo · Tapo H200 network setup query It looks like your hub needs to be on a newer version. You can find your Hub's firmware updates here: [Download for Tapo H200 | TP-Link](https://www.tp-link.com/us/support/download/tapo-h200/#Firmware-Release-Notes) The most recent update for the H200 looks to be 1.7.1, and it is dated just a few weeks ago, that version is listed as adding that compatibility. Your camera looks up-to-date, though. Check for any available firmware updates for the hub and make sure that you have auto-update enabled on the hub. Unfortunately, it is a hub, so some of my other tips of resetting the device to try and trigger the update during setup are more difficult/not worth the effort. I would recommend contacting our support team directly or starting a ticket through the Tapo App's support system, as they may be able to help push the firmware to your hub.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned The smaller 1.x version updates are usually only indicative of small manufacturing changes, such as location or chip availability, and can often be produced alongside each other. The wi-fi setup you are looking for is available to both, however, since the hub launched well before the feature was available, there are many still out there that do not have the feature out of the box and must first be updated. Honestly, it is very likely that there are both 1.0 and 1.6 models that require the update. Regarding the version in the App, when there are smaller changes - the devices tend to use the same firmware version, causing the app to report a different hardware version than reality. Always use the hardware version listed on the box and plug.
r/Tapo · Current Tapo Smart Hub (H200/H500) Compatible Camera List I think you will be surprised, we have plans for all of the above, and we showed off many of these at CES along with the upcoming hub and NVR For the H200, we have had it for a few years now and was originally used only for specific cameras. Since then, its feature set has expanded to allow a majority of Tapo cameras to record their clips directly to the SD card of the hub, rather than the camera's own SD Card. The H500 is long anticipated due to its ability to act as a faux-NVR and is releasing in just a few months time in the US once firmware and fixes are finalized. It just happens to share the same camera compatibility list with the H200s.
-
carguy143 🇬🇧
1 commentaire analysé
r/Tapo · H500 vs Micro SD cards The H200 is cheaper at only £25 and can take handle micro SD cards 512GB. What I was referring to by extra storage is the extra storage the H500 can handle (upto 16TB if I'm not mistaken).
-
Any_Noise_235 🇬🇧
1 commentaire analysé
r/Tapo · Tapo h200 Or, to wi-fi on the same network.
-
Equivalent-Hat5927 🇬🇧
2 commentaires analysés
r/Tapo · Supported cameras/hubs for local 24/7 recording - source? that page says - > 24/7 Capture is not yet fully compatible with Hub storage. Please ensure that you select Camera Storage as the local storage location, then try enabling 24/7 Capture. > > We recommend keeping an eye on the camera's firmware release notes page on our official website to see if the new official firmware supports storing pictures and video recordings on the hub when enabling 24/7 Capture. webpage print download link https://limewire.com/d/qyo4L#LwJSf4K0OB
r/Tapo · Supported cameras/hubs for local 24/7 recording - source? >Yes, it is confirmed that the TP-Link Tapo H200 smart hub does not currently support 24/7 continuous recording (capture) for cameras connected to it. incorrect. Mine is set up to record continuously to the SD card in the H200 from two cameras wirelessly. Can you provide a source for your 'confirmed' information?
-
lboyes 🇬🇧
1 commentaire analysé
r/Tapo · Security concern for buying pre-owned C260 camera On a separate note if you want to do HUB recording to a H200 it doesn't work and we have been waiting about 5 months for a software release. About 3 dates provided by Tapo and missed so far and just been pushed back again to Jan. Imagine that could be Jan 2027 at this rate. :D I thought people were giving them a hard time about missing features buried in promised software releases, but they were totally correct. Check it does everything you need it to do with the current software release before purchase as they cant be trusted to stick to their release schedule.
-
Comprehensive_Star72 🇬🇧
1 commentaire analysé
r/Tapo · H500 hub reviews? The h500 is limited to four 24/7 cameras even though it can do 16 clip recording cameras. H200 has an ethernet port as well. Ethernet on both is limited to 100Mbp which limits the benefit over micro SD. Not seeing much between them in real use.
-
username12435687 🇬🇧
1 commentaire analysé
r/Tapo · H500 hub reviews? H200 maxes our on 4 cameras. H500 can have up to 16. H200 uses a micro SD. H500 used hdd or ssd. Significantly better. H500 has better built in ai features that allow your cameras to have better facial recognition or recognition for vehicles or animals or whatever. Tapo 500 also allows you to connect a screen to view 4 camera feeds live 24/7. H500 has an ethernet port to allow for faster video playback as well. If you are going smaller scale then h200 is plenty. If you want a full home security system with many sensors and cameras you need the h500
-
pdinc 🇬🇧
1 commentaire analysé
r/Tapo · Can you use tapo h200 hub to save cctv footage from a different wifi network? No - the hub needs to be on the same network as the Wifi. Tapo has a cloud storage plan if a hub isnt an option
-
Organized_Chaos_888 🇬🇧
1 commentaire analysé
r/Tapo · Storing videos outside cameras? H200 is the best in between, but will only support 4 cameras. If you need more, wait for the H500, although that thing isn't cheap like the others. Well, not where I saw it anyway. 3.5x more expensive.
-
paranthamang 🇬🇧
1 commentaire analysé
r/Tapo · H200 killing micro SD card Happening for many https://www.reddit.com/r/Tapo/s/ArkuEirKgG and this is not an isolated incidents with specific company sd cards .
-
jj1917 🇬🇧
1 commentaire analysé
r/Tapo · TAPO H200 yeah, mine came through as well, so now I got 4/4 cameras doing 24/7 recording to the H200 (2x615F , 1xD130, 1xC720) Seems to work great so far. If you need more than 4 though, might want to look into the H500 which supports 16 cameras and you can also plug in a full hard drive for lots of storage space.
-
Stunning-Sherbert-81 🇬🇧
2 commentaires analysés
r/Tapo · TAPO H200 And they don’t do it now, I contacted support and nothing, we have to wait.
r/Tapo · Tapo H200 compatibility The H200 supports the C660 I have them both, but the H200 doesn’t support 24/7 recording feature, that only the H500 does. So you will have to just have it recording during an event detected.
-
Fair_Fruit2605 🇬🇧
1 commentaire analysé
r/Tapo · H500 vs Micro SD I’m starting to think maybe I should go with one H200 with a 256gb card and then a 128gb card in my fifth camera (2 outside and 3 inside). Theft isn’t a concern but the prices of SD cards have gone up and the ones I thought I could get for $20 are now sold out.
-
dumpitdog 🇬🇧
1 commentaire analysé
r/Tapo · H500 vs Micro SD It does only support four devices. Because of this, I actually own two. Because it's not that's dependent upon Wi-Fi and your experience less 2.4 interference issues, I have way more stability than I do going straight to the old SD card and reading it off the camera. I keep SD cards in the cameras for backup but I put a high-end SD card in my H200. Sunday I'll probably buy the H500 but it had so many bugs in it when it was first released I shunned it.
-
Big_Welder9802 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 compatibility Thanks. I found that but then I read elsewhere that the C660 is only compatible with the H500, not the H200. Just wanted to check if someone from TP-LINK might confirm for sure. I messaged their support page yesterday. Thanks again for taking the time to reply.
-
ivebeenunfoxed 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 network setup query As suggested, I wasn't able to connect my cameras to the Hub when connected to my Guest network. My router didn't allow it. I have successfully connected my C110 Xamera to my H200 Hub when using my main WiFi but I cannot connect my C246D to the Hub. I received the error "Firmware not supporting. Please update it to the latest version." H200 Hub Firmware: 1.6.1 Build 20251230 Rel. 64168 C246D Camera Firmware: 1.1.5 Build 260318 Rel. 14319n u/Riley_TP-Link Are you able to help, please? Thank you
-
General_Gold_3220 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 network setup query So yes I am a H200 user with 4 camera setup so I can answer your question . Yes it's possible to have intermediate extenders on the same network Make sure the guest wifi is visible to all local devices because sometimes it's of by default them your tapo h200 cannot find the camera .
-
DazzlingpAd134 🇬🇧🌐
4 commentaires analysés
r/Tapo · Tapo better than Eufy? the hub is just to add the sensors, if I was you I would use the h200 instead of h100 it doesn't add ai features it connectés to battery cameras if you want on a special band to lower their power consumption just go and buy a camera alone to try it, it has all the features and doesn't need a hub if you want facial recognition look at the 4K wired ones there is the C575D dual 4k that is coming soon and the solar version is C675D
r/Tapo · Tapo better than Eufy? you can get the H200 hub it's cheaper but It is limited to 4 cameras
r/Tapo · Setting up a security system you need the H200 or H500 hub to connect the cameras and everything else h100 can't do that
r/Tapo · Setting up a security system h200 can replace the h100
-
drm200 🇬🇧
2 commentaires analysés
r/Tapo · H200 - can this play different chime (and different volume) for different devices? Yes, no problem. I use that feature on all my sensors. Different sounds for leaks, high humidity, doors open at night or doors open during the day. Make sure you also create a shortcut to silence the alarms when they go off! You want to be able to quickly silence an alarm. If you have an iphone or ipad, you can even create an apple shortcut and put it on your homescreen to silence your Tapo alarms. The Tapo app makes this very easy to do
r/Tapo · Help with T100 Smart Motion Sensors and smart bulbs working together You can buy e17 to e19 adapters. But then the bulb may stick out to far. Why not just purchase some e19 sockets and change your light fixture? The bulbs do not work directly with the hub. They need wifi to communicate. But they all work well together with the tapo app (including the hub). The lights need a good wifi signal to work. If the wifi signal is weak, they may not work reliably. You may want to try a different approach. I assume your lights have a wall light switch. Use standard e17 bulbs. Then change your light switch to a tapo smart switch. The tapo smart switch can be turned on with a simple automation in the tapo app when the motion detector detects something. Another option is to plug these lights into a tapo smart plug … and let the motion detector turn on the smart plug.
-
Carl_TP-Link 🇬🇧
2 commentaires analysés
r/Tapo · Tapo h200 Yeah that won't work then to Use them with the H200 or even an H500 hub they have to be within wireless range of the hub.
r/Tapo · Tapo h200 The H200 can act as the primary or as the backup Wi-Fi network for the cameras. Once you have set up the hub on your router, you can control this in the Tapo App. The H200 can be connected via Wireless or wired, but I do recommend using it wired to the router. I have personally found that the connection is more consistent that way.
-
mdm0962 🇬🇧
1 commentaire analysé
r/Tapo · Tapo h200 All need to be on th same network. The hub should be connected to ethernet onn that same network.
-
Unlucky_Finger_4602 🇬🇧
2 commentaires analysés
r/Tapo · What is the hub for? The H100 is not for wireless cameras or doorbells and does not have local storage. The H200 supports those and uses Ethernet for a more stable connection.
r/Tapo · Question about Tapo H200 hub Yes and that's how users could install more than 4 cameras before the H500 existed.
-
Digital-Karma 🇬🇧
1 commentaire analysé
r/Tapo · Question about Tapo H200 hub You can have multiple H200 hubs on same network, on each camera you have option to choose specific hub for storing data. I currently have only one camera recording to hub all others locally and that camera and hub are in different floors connected to different access points on same network and it works. So I believe the camera and hub need not be in WiFi range, it uses LAN.
-
dinosuitgirl 🇬🇧
2 commentaires analysés
r/Tapo · Question about Tapo H200 hub Anywhere as long as it's connected to the internet... I have 2x EAP650s spread over 26 acres and they are in different buildings supporting satellite APs and the hub is at one end... My SSIDs /WLANs are all different too.... And my cameras are scattered across the property on all kinds of APs
r/Tapo · Question about Tapo H200 hub You can have multiple hubs on a network and you assign each camera to a hub... I've also seen people mix several H200s and a H500 all on the same network.
-
sperey 🇬🇧🇿🇦
4 commentaires analysés
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned Apologies, You are indeed correct BUT it is region dependent. USA region has a hardware v1.0 and v1.6 EU/Asia regions have a hardware v1.0 only What region are you in? Apparently should still work on H200 v1.0 I still have my h200 from when I upgraded to H500 (love the facial recognition). I will check on mine today or tomorrow. Though if you are USA and want your h/w v1.6 go for it!
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned I have gone back to check tapo app. I can now see the confusion (see pic attached) 1. If there firmware supports it you can setup but Wi-Fi 2. Note this is firmware (software) not hardware So what you are looking for is the H200 that comes with the newer firmware. Thus in the belief that this will be more recent device, probably right. It does not change the hardware on the device as it is all firmware. https://preview.redd.it/74d400itmslg1.png?width=864&format=png&auto=webp&s=ccae504a7bf0ddf61487acabbd721c3760a0d62d
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned You've got yourself confused. The H200 has to be setup by Ethernet initially, after which you can switch to wifi. You cannot setup over Wi-Fi initially.
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned And does not work on hub h/w ver 1.0
-
philrandal 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 -- older hardware version received from amazon --> returned Are you sure that's not a function of the FIRMWARE? A quick Google (other search engines are available) suggests that there is no functional difference between H200 hardware versions.
-
itchywizard 🇬🇧
1 commentaire analysé
r/Tapo · Current Tapo Smart Hub (H200/H500) Compatible Camera List Thank you so much for your update! I really appreciate it; I can now buy the C211, and connect it to H200 hub without having to buy endless SD cards
-
SoundsLikeTheDog 🇬🇧
1 commentaire analysé
r/Tapo · Can't view recorded clips when disconnected from the home wifi. For anyone else who comes across this, I connected the hub to wifi as well as using the Ethernet cable then rebooted the device and it appears to be working now.
-
Otherwise_whizley 🇬🇧
1 commentaire analysé
r/Tapo · Single most frustrating piece of technology I've never used a card in a hub except for the doorbell which is using an H200 hub and I've never had an issue such as you described. Perhaps it's purely an issue with the hub?
-
vicalpha 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 stopped receiving state updates from sensors I somehow resolved the issue after adding my Samsung Q990C to my new service mesh that was nearby the Taboo Hub. I'm not totally understanding the relation between these two devices & the issue I've experienced.
-
MrSevenNine 🇬🇧
1 commentaire analysé
r/Tapo · Tapo H200 stopped receiving state updates from sensors My cameras connected to Tapo H200 have been disconnected, can't view them anymore..
-
scottjl 🇬🇧
1 commentaire analysé
r/Tapo · Maximum connection to the H200 hub. Straight from the product page: > 4 cameras or doorbells So no. You can not connect more than 4 cameras to the hub, no matter how they are connected, wireless or wifi. The H400 supports up to 16 cameras. https://www.tapo.com/en/product/smart-hub/tapo-h200/
-
ThrowawayMyAccount01 🇬🇧
1 commentaire analysé
r/Tapo · US vs. EU devices, hubs and their cross-compatibility I see. Well, I don't really care about buying accessories just 2-3 cameras from the US. They are like half the price. And at least one of them isn't even available in India/UK. That's one of the only reason behind my interest in buying the US variants. But if Hub 500 isn't cross-compatible, odds of H200 seem even lower. Can I ask which cameras you have and if they are still working with the other Hub?
-
bkintanar 🇬🇧
1 commentaire analysé
r/Tapo · Tapo d130 & Smart hub h200 Yes. The H200 hub supports a "Hub Storage" feature that allows you to "directly store the videos of your camera/doorbell on a Tapo Hub with extended storage functionality within the same local network." The Tapo D130 is listed among the compatible devices that support this feature. source: https://www.tapo.com/us/faq/673/
-
Particular_Rub7272 🇬🇧
1 commentaire analysé
r/Tapo · Tapo D235 with Tapo H200 hub My H200 hub doesn't have the option to connect to D235 doorbell. Both are on the latest firmware.
-
Loud-Possibility4395 🇬🇧
1 commentaire analysé
r/Tapo · Tapo D235 with Tapo H200 hub So D235 works connected to SD card inside H200 - thank ypu!
-
Rockall__ 🇬🇧
1 commentaire analysé
r/Tapo · Tapo D235 with Tapo H200 hub Yes this is how I have my D235 set up. Works beautifully
-
Had2CryToday 🇬🇧
1 commentaire analysé
r/Tapo · Tapo D235 with Tapo H200 hub A recent firmware update to my D210 allowed for video direct to my H200 hub. You need to verify versions to be sure.
-
Nojevah 🇬🇧
1 commentaire analysé
r/Tapo · Current Tapo Smart Hub (H200/H500) Compatible Camera List Good news ! My C211 got an update, and now it found the H200 hub. And C410 camera also works with the H200. So right now, I can say Tapo delivers !
-
samsplinterc 🇬🇧
1 commentaire analysé
r/TpLink · Tapo hub won't stop ringing I had this problem earlier today. This is how i fixed it. In the app, open the doorbell setting (not the hub, the doorbell). Then go to Doorbell > paired chime > select your hub > change the ring setting. Changing the setting on the hub side did not work for me, but the method above worked.
-
Loopsloopsloops 🇬🇧
1 commentaire analysé
r/TpLink · Why is the Tapo H200 hub out of stock? H200 WAY MORE reliable/stable and expandable. Now 2025 still no H200 availability⁉️
-
goose-77- 🇬🇧
1 commentaire analysé
r/Tapo · H200 Hub questions and confusion The H200 doesn’t have its own WI-Fi network for the cameras to connect to…
-
Historical-Low235 🇪🇸
1 commentaire analysé
r/SecurityCamera · Security camera needed for my small house under 1k AUD please Tiene sentido. Si las cámaras están en exterior sin perforaciones, lo que más tiene sentido robarse es precisamente la cámara con la microSD dentro. Un NVR o hub local resuelve eso: la grabación queda dentro de casa aunque te lleven la cámara. Dos opciones concretas según cuánto quieras complicarte: Si quieres algo simple y ya tienes Tapo: el Tapo H200 es un hub Zigbee con soporte para cámaras Tapo que permite grabar en NAS o USB conectado directamente. No es un NVR completo, pero para 2-4 cámaras funciona sin configuración compleja. El problema es que las cámaras solares de Tapo (C425 incluida) usan conexión WiFi directa, no Zigbee, así que la grabación sigue yendo a microSD o a la nube de Tapo. El hub no cambia eso para cámaras solares. Si quieres grabación centralizada de verdad: necesitas un NVR con soporte ONVIF o un sistema como Reolink NVR + cámaras Reolink. Reolink vende kits cámara + NVR específicamente para esto, y sus cámaras solares (Argus 4 Pro) soportan grabación al NVR por WiFi. Es la opción más limpia si quieres todo en una caja dentro de casa y no depender de microSD ni suscripción. La pregunta práctica: ¿cuántas cámaras estás pensando poner en total? Con 2-3 cámaras el NVR de Reolink de 4 canales cubre de sobra y los kits suelen salir más baratos que comprar por separado. Con más de 6 ya merece la pena mirar algo como un mini PC con Frigate o Home Assistant, pero eso ya es otro nivel de complejidad.
-
Murky_Bluebird6891 🇮🇹
2 commentaires analysés
r/Tapo · Tapo h200 Gentilissimo grazie mille, mi hai evitato di acquistarlo inutilmente 😄
r/Tapo · Tapo h200 No, è tutta un altra strada 🤣😂 Perciò chiedevo, altrimenti devo optare per un Nvr onvif
-
Holiday_Bat_3343 🇵🇱
1 commentaire analysé
r/TpLink · Tapo H200 hub is a mess Cześć. Pomijając słabą jakość połaczenia dla mnie największą porażką tego urządzenia jest to, że nagrania z kamer zapisywane sa w kilkunastosekundowch klipach często z pominięciem najważniejszycvh zdarzeń. Róznica pomiędzy nagraniem na kartę zainstalowaną w kamerze a nagraniem na H200 jest kolosalna. Zapis na wewnętrznej karcie kamery jest dłuższy, tagowanie zdarzeń jest komplementarne. W przyapdku zapisu na kartę w H200 tagowanie jest niekompletne, klipy są kilkunastosekundowe, bez kontekstu przed i po zdarzeniu. Dramat.
-
Gold-Whole-3739 🌐
1 commentaire analysé
r/Tapo · Need help — Tapo Doorbell D230S1 + Hub H200 not detected 😩 (Singapore) I'm having the same problem
-
Elsnakesolid 🇪🇸
1 commentaire analysé
r/TpLink · Tapo H200 hub is a mess Hola! Yo ya tenia un hub h200 con un timbre inalambrico. Y funcionaba a la perfección. Ahora compre una cámara c420 y al querer instalarla me lleve una decepción. La vinculación que debería llevar 10 minutos como máximo ya me hizo perder como 3 horas y aun no pude conectar la cámara al hub. Probé mil veces, tanto el hub como la cámara parpadean la luz en verde pero luego de un ratito dice que no se encontró cámara. No se que más hacer ya
Aucun avis pour ce filtre.
Souvent comparé à
Questions fréquentes
Le Tapo H200 fonctionne-t-il sans abonnement ?
Oui, les utilisateurs Reddit indiquent qu’une carte microSD installée dans le hub permet de conserver localement les vidéos des appareils compatibles. La compatibilité et les modes d’enregistrement disponibles varient toutefois selon les caméras et le firmware.
Combien de caméras peut-on connecter au H200 ?
Le consensus Reddit fixe la limite à quatre caméras par hub. Une caméra à double objectif peut occuper deux emplacements, mais plusieurs hubs H200 peuvent être utilisés sur le même réseau.
Les enregistrements d’événements sont-ils fiables ?
Les retours Reddit sont critiques sur les clips d’événements, souvent limités à environ 10 à 15 secondes et parfois privés du contexte utile. Certains utilisateurs préfèrent donc l’enregistrement continu lorsqu’il est compatible.
Le H200 est-il facile à installer ?
Une fois configuré, le hub s’intègre facilement à l’application Tapo et peut fonctionner en Ethernet ou en Wi-Fi selon sa version. Les anciens exemplaires peuvent toutefois exiger une première configuration par Ethernet, tandis que certaines compatibilités dépendent d’un firmware dont le déploiement peut tarder.
Est-ce que cela vaut vraiment la peine de prendre le plus gros modèle h500 ? Le H100 ou H200 est suffisant ?