Tapo C210
Idéal pour : Idéale pour surveiller une pièce, un bébé ou une imprimante 3D avec enregistrement local et sans abonnement obligatoire.
En bref : Les avis Reddit décrivent une caméra intérieure abordable, offrant une image globalement nette et un enregistrement local sans abonnement. La détection, l’application et la stabilité Wi-Fi ou microSD concentrent toutefois de nombreux signalements d’irrégularités.
Au-delà de ce modèle, la marque Tapo (toutes gammes) recueille 37 % d'avis positifs sur 1023 utilisateurs Reddit. Ce signal marque ne compte pas dans la note du modèle ci-dessus.
Points forts
Bon rapport qualité-prix
6 2
« The savings are worth it as these are overpriced in Canada. » Voir l’avis
« Honestly, these cameras are so cheap that it's not even worth the time or return shipping cost to file a warranty claim. » Voir l’avis
« The good news is that a C210, at least here in the US, is on sale and currently is only $21.99 on Amazon. » Voir l’avis
Utilisable sans abonnement
9 6
« I've just done this by creating a blocking rule on my firewall, now if I load the app the camera shows disconnected, but the rtsp stream is still active in HA. » Voir l’avis
« No, you should be able to see the recordings in the app anywhere, even without Tapo Care. » Voir l’avis
« The subscription mainly adds Rich Notifications and Cloud Storage, along with a few other minor app features. » Voir l’avis
Points faibles
Fiabilité à surveiller
12 47
« I don't really know why but i could format it and test it on a pc but the camera couldn't format it. » Voir l’avis
« I don't disagree with your appraisal but I'm talking about a *brand new card* of the exact same model and spec as the one that failed. » Voir l’avis
« I like the C210 indoor pan and tilt barrel 12v but I've had them go offline more than I'd like... » Voir l’avis
Détection peu fiable
8 13
« But person detection and motion detection is crappy at best. » Voir l’avis
« Something you have to learn to live with. » Voir l’avis
« Yeah I realized after that it doesn’t say anywhere on the box that it has those so it’s on me. » Voir l’avis
Installation contraignante
8 17
« i had to get three separate access points so each can have its own channel. » Voir l’avis
« The C220 is compatible but the C210 and TC70 are not compatible, this comes from their website though. » Voir l’avis
« Weird thing about the one with 1.4 is that it disconnected itself from my network. » Voir l’avis
Application perfectible
25 37
« Ça marché deux jours et aujourd'hui ça ne marche plus.. » Voir l’avis
« It does also mean you can't use the app even when connected to your own WiFi as it seems they route the traffic back to their servers first. » Voir l’avis
« I have just replaced the tapo C100 and C210 cameras i had watching over my 3D printers, as in home assistant it was constantly running at 95% processor use to display 2 x 2k and one 1080p stream from… » Voir l’avis
| Critère | Note /10 | Ce qu'en dit le consensus |
|---|---|---|
| Image | 4.3 | Les utilisateurs Reddit apprécient surtout la netteté de jour, mais relèvent un gain 2K inégal, des artefacts en mouvement et une vision nocturne perfectible. |
| Application | 3.1 | L’application offre lecture à distance, regroupement des caméras et automatisations, mais son géorepérage, ses téléchargements et plusieurs intégrations sont jugés irréguliers. |
| Utilisation sans abonnement | 5.8 | L’enregistrement microSD et les flux RTSP ou ONVIF permettent un usage courant sans abonnement, malgré quelques réserves sur la dépendance aux services Tapo. |
| Prix | 7.7 | La C210 est souvent considérée comme économique, surtout en promotion, mais sa valeur varie fortement selon le pays. |
| Fiabilité | 1.6 | Les expériences vont de plusieurs années sans incident à des déconnexions, incompatibilités microSD, mises à jour inégales et rotations spontanées préoccupantes. |
| Détection | 2.1 | La détection fonctionne correctement chez certains utilisateurs en intérieur éclairé, mais les fausses alertes et événements manqués sont fréquemment rapportés. |
| Installation | 2.6 | L’installation est souvent simple avec l’application, mais dépend du Wi-Fi 2,4 GHz et peut se compliquer avec le WPA3, certains réseaux maillés ou certaines cartes microSD. |
Avis Reddit
165 avis analysés · Positifs 45 Neutres 24 Négatifs 95
-
Jmnx221 🇫🇷🇬🇧
9 commentaires analysés
-
nee_m_d 🇫🇷🇬🇧
7 commentaires analysés
r/Tapo · How to really make leaving/coming home automation work for C210 cameras? Aujourd'hui, je suis sortie deux fois et, à chaque fois, tout a bien fonctionné. Je n’ai toujours pas éteint le téléphone. Si ça continue comme ça pendant une semaine, j’essaierai de l’éteindre pour voir si tout fonctionne encore après ou non. Oui... on va finir par y arriver !!
r/Tapo · How to really make leaving/coming home automation work for C210 cameras? Bonjour, Je voulais vous informer de l'avancement de mon ticket chez TP-Link. J'ai été mis en contact avec le support avancé, qui m'a demandé de vérifier certaines configurations et de leur envoyer des captures d'écran. Je vous tiendrai au courant. Notez que il y a trois jours, j'ai désactivé l'option de relance du téléphone pendant la nuit et depuis lors, les automatisations ont fonctionné ! Il est donc possible que le problème de dysfonctionnement soit lié au fait que le téléphone a été éteint??? https://preview.redd.it/iunseun19rte1.png?width=1308&format=png&auto=webp&s=ae569e5104d0aedb362853c5458a21c0b2901ad5
r/Tapo · How to really make leaving/coming home automation work for C210 cameras? Bonjour, Je voulais vous informer de l'avancement de mon ticket chez TP-Link. J'ai été mis en contact avec le support avancé, qui m'a demandé de vérifier certaines configurations et de leur envoyer des captures d'écran. Je vous tiendrai au courant. Notez que il y a trois jours, j'ai désactivé l'option de relance du téléphone pendant la nuit et depuis lors, les automatisations ont fonctionné ! Il est donc possible que le problème de dysfonctionnement soit lié au fait que le téléphone a été éteint??? https://preview.redd.it/bszs2xnr8rte1.png?width=1308&format=png&auto=webp&s=5d8187e7e00810d2ae7b19243b24c148f92669f5
r/Tapo · Geofencing doesn't work again.. When I first got my cameras a few months ago, I had the same issues, but Tapo later fixed the bugs in their updates. Their support was very helpful — they asked me to install a trial app and send them the logs whenever the problem occurred. I also set up a smart automation that sends me a notification every time I leave or arrive home, so I can tell when it’s working. That said, once or twice in the past few weeks I did receive an “arrive home” notification while I was already at home.
r/Tapo · How to really make leaving/coming home automation work for C210 cameras? I got a useless answer giving me the procedure of how to create the automation... which is what I've obviously done... it's just not working all the time. I've replied, but not gotten another response.
r/Tapo · Tapo Camera Geofencing / recommended settings Thanks for your reply. Oh I see... well, I guess I'll just give up on IFTTT and hope that Tapo updates their geofencing. Don't know why it's not working. I have Arlo cameras at the office and their geofencing works 100%!
r/Tapo · Tapo Camera Geofencing / recommended settings Hi, thanks for this. I tried with IFTTT (which I'm just discovering) and when I try to choose the Tapo device (after having connected to my Tapo account), it says ''no options available''. Not sure what I'm missing...
-
Dazman_123 🇬🇧
2 commentaires analysés
r/homeassistant · Tapo Cameras without using TP-Link at all? I've just done this by creating a blocking rule on my firewall, now if I load the app the camera shows disconnected, but the rtsp stream is still active in HA. It does also mean you can't use the app even when connected to your own WiFi as it seems they route the traffic back to their servers first.
r/homeassistant · Tapo Cameras without using TP-Link at all? There always has to be a trade-off, in our case the camera acts as our baby monitor so blocking all outside access for privacy seemed a no brainer after the horror stories of baby monitors getting hacked.
-
plump-lamp 🇬🇧🌐
5 commentaires analysés
r/Tapo · Is there a way to configure a Tapo C210 to record only when it detects motion? Did you actually look at the settings? Storage & Recording -> Recording Schedule -> change the colors to orange or blue depending on what setting you want
r/Tapo · Roughly every 2 hours my Tapo C210 tries to connect to a 10.x RFC1918, details in post. Its probably crap programming. They likely run 10.x in their firmware development
r/Tapo · Tapo C210 cannot record/format Memory card File for an RMA with support
r/Tapo · Camera motion detection and smart plug yes it should work fine
r/wyzecam · Wyze Cam v4 — $36 for 2.5K with color night vision and NO mandatory subscription Imagine if you got a tapo c210 or similar... Then you'de have free person/car/per detection and a more reliable camera!
-
TN_REDDIT 🇬🇧
1 commentaire analysé
r/Tapo · C210 - where is "Digital Zoom" ? I zoom in with my fingers using the app 😀
-
Gazz_292 🇬🇧
3 commentaires analysés
r/reolinkcam · A Real-World User Review of Reolink Products yeah, that sounds like user error.... surely you know that nowadays every tech company uses the word 'Ai' to describe any process that their product does using a processor... even a basic digital thermostat could be classed as having artificial intelligence as it's technically 'thinking for itself' by monitoring the temperature and turning your heating / AC units on and off in response to the temperature fluctuations. And if you needed more storage, why not get the RLN36 NVR which can take 48TB worth of HDD's, that would have been a hell of a lot cheaper than the home hub pro as it does not come with HDD's, but as you have your own anyway that's not an issue, Or set up a simple NAS box and FTP the data from the NVR over to larger HDD's when it's internal HDD is getting full. : i bought (19 so far) reolink cameras and an NVR knowing it's consumer grade cctv gear, the main feature over others for me is it runs 100% local without the need for sending your video and data to a server in china for processing and back, and charging a monthly fee to do so. And reolink gear has great integration into Home Assistant. My reolink cameras are much better than the tapo ones i had before, which don't even give you the ability to change picture settings like saturation, contrast, brightness, or bitrate etc, and they only have a phone app to control them unless you have a HA server, and then they are very process intensive i found. . I have just replaced the tapo C100 and C210 cameras i had watching over my 3D printers, as in home assistant it was constantly running at 95% processor use to display 2 x 2k and one 1080p stream from them. I now have a pair of reolink E1 Zoom 4K cameras replacing the tapo C210's, and a lumus pro replacing the C100, And on the exact same home assistant printer overview page with just the camera feeds changed to the reolink ones, the HA server processor sits at about 5%, and that's sending 3 x 4K streams at their max bitrate!! : My other reolink cams are in the garden, 9 x colourX cams, a trackmix, 823A, 81MA, couple of lumus 2K cams in nestboxes, a doorbell cam etc. They took a bit of dialing in but i have them working just how i want them now, I use a 16 channel 410 NVR, and i did not want the cameras running on the home network so i run the NVR in non hybridge mode, so each camera runs on the NVR's private 172 subnet, Even the lumus wifi cams do, as i plugged a POE wifi AP into one of the NVR's camera ports, and that lets the wifi cameras connect directly to the NVR and use it's private 172 subnet too, This was even more handy as i have the wifi AP on the end of a \~25 meter cat6 cable as it's located in the shed, my home wifi barely makes it outside the house walls due to their construction, so this method gives the wifi cameras in the garden a decent signal out there and keeps them on the private subnet and off the main network.
r/homeassistant · Tapo Care camera feed issues with HA >Don't quote me on this, but my understanding is that Tapo cameras have a certain number of feed streams they can "serve", and Tapo Care will be taking one of them yeah that is true, i often get the 'too many connections' error on the tapo phone app for my remaining tapo cam in the garden, often it's from refreshing the HA dashboard showing that feed and the old 'memory' of the last connection got stuck that triggers this, I've grown to hate tapo cams, and all but one of the 5 i had now reside in my 'box of things to harvest parts from' I switched to reolink cams and have 23 of them now... BUT even they have a connection limit for the high resolution streams, : I often wonder if i'm the only one who hates tapo cams, i had 3 streams from them on a HA dashboard, and it would use \~95% of my HA server - (Pi 5) processor use, to display a 1080p stream and 2 x 2k streams (1 x TC60 and 2 x C210 tapo cams) That same dashboard showing 3 x 4k streams from the reolink cams i replaced the tapo ones with sits at about 6% cpu usage !! The reolink cams are 1 x lumus pro and 2 x E1 zoom's, the newest 4k models, And the tapo C530WS i have in the garden has never played well with HA, always freezing or failing to load the stream, no matter what integration i tried from the tapo camera control to frigate, WebRTC etc, an the basic picture entity card to advanced camera card.
r/Tapo · Do I need a H200 hub for 5 C320WS cameras? this will probably get deleted for mentioning a competitor.... but i switched over to using reolink (R) cameras, mostly as we didn't get on with the tapo phone app as the only way to play back recordings on the SD cards. we now have 9 (R) cameras and a 16 channel NVR (with the tapo cams being recorded by the (R) NVR using their onvif streams... can't control the pan/tilt of the C210's, C530ws via the (R) NVR, nor change camera settings, so still use the tapo phone app for that... but the tapo pan/tilt cams are set up to auto track things and it does that on it's own. The best thing is the (R) PC client, so much easier to view multiple cameras recordings on a big monitor sat at the PC / laptop / mac (or use the phone app if you don't have arthritic fingers that makes using a phone painfull) No subscriptions either, everything runs locally for me, and all my (R) cameras except 2 are POE (i have a poe wifi AP on the NVR's private subnet for those 2 wifi only cams, so not camera traffic touches my home network unless i am viewing the live stream or recordings on the PC client or phone app. : Tapo have been saying they will be releasing NVR's, more 'pro-sumer' cameras etc, but things tend to move very slowly it seems, there is the TP-Link Vigi stuff, but that stuff is more aimed at businesses, offices, shops and factories etc with stuff like object removal detection etc.
-
catmandot 🇬🇧
2 commentaires analysés
r/googlehome · Tapo camera FINALLY showing live feed on Google Home app It's working for me too, all of the 13 Tapo cameras (C210, 220, 225, 230, 530, 400). For the first time.
r/Tapo · Tapo C210 not saving video No, you should be able to see the recordings in the app anywhere, even without Tapo Care. Check if the settings under Storage & Recording are ok.
-
Blue-Thunder 🇬🇧🌐
10 commentaires analysés
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? The savings are worth it as these are overpriced in Canada.
r/Tapo · Tapo C210 (as mentioned on the back of the camera) stopped working. Only IR lights turn on when I power on the Camera. If you're stateside, these are $20 and not worth fixing. If you're not under warranty, toss it and just buy a new one. That's the sad reality of these inexpensive cameras.
r/Tapo · How to connect to the PC? That is absolutely NOT possible.
r/Tapo · How to connect to the PC? There is zero way as your university uses WPA3. There is zero way to use this as a web cam, which is what is appears you are trying to do.
r/Tapo · Camera for toddler room Sounds like you just need a basic camera and the C210 should fit the bill. If you want "more coverage" you could try one of the dual cams like the C245D. Extra wide lens, though you do need a wedge for the mount as the stationary camera only tilts down 10 degrees.
r/Tapo · Using the tapo app through tailscale if the app refuses to work, and you're using RTSP feeds, why not use something like tinycam instead? I have no issues using my cameras with tailscale.
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? Yes they are currently on sale right now as Tapo is having their "Spring Sale".
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? OP lives in Canada and the C210 is almost $70 here.
r/Tapo · C120 and C210 cameras motion detection has become unreliable It might be your sd card. I have several cameras and I've noticed that the camera I did not put a high endurance card in, lags behind the ones that do have high endurance cards.
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? I would say yes.
-
drm200 🇬🇧
12 commentaires analysés
r/Tapo · Order of priority In the Tapo app, if you turn “notifications” on, you can choose an activity type and a schedule for when it is active, and also enable push notifications to your phone. If this will not give you what you want, then you can create automations. Automations allow for more flexibility and customization of the camera schedule/notifications. If you create an automation to send you a notification when activity is detected BUT do not disable “notifications”, you may receive two notifications if there is overlap of the automation and the notification schedule. There is no priority …. Both will work in parallel. In general, I usually disable “notifications” and create my own automations to detect/send notifications. There is a confusing point here … disabling “notifications” has no impact on notifications created by automations.. Automation notifications are sent regardless of the “notification” setting. You should think of the “notification” setting as a quick/easy way to create a schedule and send notifications when activity is detected. For more granular control use automations and turn off “notifications”. You can use both together but then you need to manage smartly the automations so you do not receive multiple alerts for the same event. To control recording use the “privacy mode” setting. This can easily be controlled in automations. When privacy mode is enabled, the camera is not recording, there is no live feed and no event detection. When privacy mode is disabled, there is a live feed, video recording and event detection is available. Again, all of this can be controlled easily via automations. You can also manually enable/disable privacy mode
r/Tapo · Tapo C200 or C210? I have a Tapo C210. The video streaming works well with the app. The video clarity is good. But person detection and motion detection is crappy at best. The person detection is always sending me false alarms. When i review the video feed, there is absolutely nothing changing… no people, no pets, no movement, no lighting changes, no shadows. It will detect a person, but with so many false alarms, it becomes annoying. The motion detection is questionable. I have my irobot vacuum cleaning the floor on auto. It is about 13 inches in diameter and 4 inches tall. It is black and cleaning an offwhite floor. The motion detection has NEVER detected this thing moving back and forth in front of the camera as it cleans. It will detect me, however, if i walk into the room (but that is redundant to the person detection)
r/Tapo · Setting up a security system You can do everything you want with the h100. Your camera works fine with the Tapo app and does not require a hub. Basic method: 1) create a shortcut “Disarm Alarms” that puts the cameras in privacy mode 2) create a shortcut “Arm Alarms” that disables privacy mode in your cameras. 3) Setup your camera detection events and notifications as you want. The camera is disabled when you click the shortcut “Disarm”. Camera notifications will be enabled when you click “Arm” because you have disabled privacy mode. 4) Now create a shortcut automation for each sensor. The TRIGGER will be the sensor open. The ACTION will be something like “Front Door Open”. Name each automation something like “Front Door Sensor” 5) Now go back and edit shortcut “Disarm Alarms”. Add an ACTION to DISABLE automation “Front Door Open”. Add similar actions for each sensor automation. Save your edits. 6) Now go back and edit shortcut “Arm Alarms”. Add an ACTION to ENABLE automation “Front Door Open”. Add similar actions for each sensor automation. Save your edits. 7) Now when you click the shortcut “Disable Alarms”, you will receive no notifications. Everything is disabled. When you click shortcut “Arm Alarms”, you will receive notifications whenever a camera detects an event or a sensor opens 8) This works fine as long as all sensors were closed when you armed the alarm. But if the door was already open, you will not trigger a door alarm because the door is already open. However, it will work once the door is closed. Of course you can create a separate set of automations that will send a message warning you that the door is open at the time you click “Arm Alarms” to solve this problem.
r/Tapo · Tapo C200 or C210? Yes, that works. But I have not used that feature much
r/Tapo · Tapo C200 or C210? Yes. If you are not picky about the red light and turn off motion detection, it should be fine as long as you are not trying to use it to cover a very large room. I have not had wifi issues with it.
r/Tapo · Tapo C200 or C210? I am not using it now. I am using c120’s inside. I do not need the pan-scan as the c120 has a pretty wide field of view. The c210 has a visible “red eye” infrared light for night vision. The c120 infrared light is not in the visible spectrum, so it’s infrared light is not visible like the c210. I prefer not to have the “red eye” light from the c210. However, the c210 has a weird background crackling sound in the audio. I have four c120’s and they all have this problem. Some others on reddit have also complained of this problem. I have two of my c120’s stuck directly to a window pane. They work great for that. And i have enough yard light at night that I get color video with the infra red disabled. I could not do that with a c210. I disable “motion detection” on all my Tap cameras. I find too many false events due to lighting changes, frame changes etc. Person detection works good inside. I do not have pets so can not really comment on that except that neither camera would reliably detect my robot vacuum moving around. So for my situation, I prefer the c120.
r/Tapo · simplest way to switch from home/away mode? The built in Tapo “Home” and “Away” modes are inaccessible. So I build my own by creating the automation “Home” as suggested. You need to forget about the built in home automation. To clarify better change the name of the “Home” automation I created to “I am home” Now create your camera automation: Trigger … person detected Add condition … AUTOMATION STATUS “I am home” is DISABLED ACTION … Send notification message As you can see, the camera notification gets sent only if the automation “I am home” is disabled. To repeat: “I am home” gets enabled by a geo fencing automation upon arriving home “I am home” gets disabled by a geo fencing automation upon leaving home This works very well
r/Tapo · simplest way to switch from home/away mode? You need to create the “home” and “away” automation. It is as simple as creating any simple automation and calling it “Home”. When you arrive home you enable this automation. When you leave home, you disable this automation. Now all you need to do is test if the automation called “Home” is enabled or disabled. If it is enabled, you are home. If not, you are away. Automation “Home” example: Trigger when time of day 8:00 am If condition Plug #1 Device ON AND If condition Plug #1 DEVICE OFF THEN ACTION send message “This message will never be sent because Plug #1 can not be ON and OFF at the same time” Now you can use this automation to provide your “Home” status. Create one automation that enables “Home” when you arrive home. Create a second automation that disables “Home” when you leave home.
r/Tapo · simplest way to switch from home/away mode? You do not have to turn the camera off. I just gave you one option. You can easily keep the camera running/recording and stop messages when you are home. It is 5 minutes in automation creation. You can easily implement the solution with either a pushbutton, a shortcut, or geofencing.
r/Tapo · simplest way to switch from home/away mode? Well it only takes a few minutes to create the automations once you are familiar with automations. But I understand that creating your first automations can seem somewhat daunting, so i agree Tapo could make it more user friendly. But on the flipside, much more flexibility is gained by being able to create your own customized experience. As I understand your post, you want to receive notifications from your c210 only when you are away from home. The easiest way to do this is to create two automations. 1) The first automation “Home” would be triggered by geofencing when you arrive home. This automation would then have an “ACTION” that would ENABLE your c210’s privacy mode. When in privacy mode, your camera is not recording or sending notifications. 2) The second automation “Away” would be triggered by geofencing when you leave home. This automation would then have an “ACTION” that would DISABLE your c210’s privacy mode. Now your camera is recording again and sending notifications. That’s it. Now your cameras will only send notifications when you are away. This is just one solution of many depending upon your specific wants. For example, if you are trying to do this with two different people (and two phones), it is a little more complicated. but still only requires a few automations
r/Tapo · simplest way to switch from home/away mode? You can easily create your own home/away modes using automations in the Tapo app. Basically, you create an automation and then enable the automation when you leave home and disable the automation when you return home (using geofencing). Then you test the status of that automation (either enabled or disabled) to run whatever you want while home or away
r/Tapo · Tapo C200 or C210? Tried all the settings multiple times. I have an irobot roomba. Black color on offwhite floor. About 12 inches in diameter. It gets detected as a person if detected, but most of the time is not detective. Changes in lighting (turn on/off a light) is detected as a person. Unblocking privacy mode automatically creates a person detection. ….
-
dabber40 🇬🇧
4 commentaires analysés
r/Tapo · Using multiple tp link software on cameras I knew the first option would be limited as I’ve got a camera on share but I’d never done the second option but had thought about trying it, thanks for your feedback and glad you got sorted
r/Tapo · Using multiple tp link software on cameras You should have two different accounts and set them on one phone then share them with the other account on the second phone. Above is the correct way to do it but you could try setting everything on phone one and then adding the same account email and password to the second phone, I don’t know if this will work but if it will you’ll be logged on and the app won’t know what’s what to differentiate ( if this second option does work it would be good to know )
r/Tapo · how to find out if my tapo c210 camera is still connected to my ex's account It will have the name of his WiFi he needs to check the shared accounts part, but why even bother when it’s so easy to reset and be certain
r/Tapo · New user: Camera feed not working with Google Home and other Q's Just use your app, put all the cameras in the same group, you can then scroll through them all live as large images or click the + button on the picture and view them all at once
-
roggz 🇬🇧
1 commentaire analysé
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? Honestly, these cameras are so cheap that it's not even worth the time or return shipping cost to file a warranty claim. If my C210 breaks, I'd probably just buy a new one.
-
igomi 🇬🇧
1 commentaire analysé
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? I have both. The C210 is significantly better in video quality.
-
PizzaPastaMozzarella 🇬🇧
1 commentaire analysé
r/Tapo · simplest way to switch from home/away mode? I have a Tapo S200B button placed by my front door with shortcut for enabling and disabling privacy mode on my camera. I just press it on my way in and out. One tap to enable and double tap to disable. Simpel, easy and works great.
-
Droid8Apple 🇬🇧
1 commentaire analysé
r/Tapo · New Tapo Hybrid cams? What's the difference between them and their other cams? Why are they called Hybrid? I bought two of the center ones you linked (C246D) to replace my C520WS. The quick rundown is: * Much better quality picture * Much wider FOV on the fixed camera portion * Much faster tracking * Unique features like tapping and holding somewhere on the fixed camera stream and the telephoto moving to that location as well as dual tracking which will move the pan to an event triggered on the fixed camera view * USB C power The only major downside for me is you cannot change the FPS at all. And it's locked at something lower than I'm used to. It feels like 20-24 fps which is a noticeable jump when all my other Tapo cams (C110, C210, Ct20ws) have 30fps. The fixed portion can tilt a small amount (manually) but it's not enough. They should have included and angled spacer of some kind as most people feel it's aimed too far upward. Hope that helps.
-
ElVortexEUW 🇬🇧
2 commentaires analysés
r/homeassistant · Tapo Cameras without using TP-Link at all? I'm currently sniffing which connections the camera is making and blocking them for the client, but was wondering if there was a better way of doing this. I don't want TP access my camera stream so I don't mind if I'm unable to use the camera via their app.
r/homeassistant · Tapo Cameras without using TP-Link at all? I've assigned it a static IP but haven't been able to figure out how to deny it WAN access. I have a GL.iNET router if that helps? I've create a profile through the parental controls but still no luck as the stream still shows on the Tapo app.
-
Jenny_8675309_69 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 false person detection alerts Something you have to learn to live with. Try turning down the detection sensitivity but it probably won't work.... Tapo software isn't very good at person/animal detection
-
Agile_Knee_8919 🇬🇧
3 commentaires analysés
r/Tapo · Using multiple tp link software on cameras The second option does work and it is the only way for both users to have full control of the camera. If you share a camera from the main account to another user some functions are not allowed for the second account.
r/Tapo · Using multiple tp link software on cameras Yes they sent me a download link. They asked for various information such as the Mac addresses or the cameras affected and the working one so I guess they can contact them all remotely from their end as they pretty quickly diagnosed the issue
r/Tapo · Using multiple tp link software on cameras I have had an issue previously that I contacted tapo support about in that I bought 3 cameras as part of a deal and initially only used one, putting the other two in a drawer for 6 months. When it came to using them and updating the firmware they were two or three versions behind the latest one and would not update. After a few emails and checks that they asked for Tapo support sent me a different app that didn't check the previous firmware and just updated straight to the new one.
-
qoatzelcoat 🇬🇧
1 commentaire analysé
r/googlehome · Tapo camera FINALLY showing live feed on Google Home app My C120’s and C210’s are confirmed working too!!
-
makishiP 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 cannot record/format Memory card It's not the camera, the SD card you purchased is a scam. Contact whichever store you bought from and get refund. Let this be a lesson, if a memory card seems too good to be true, it's because it's fake. There is no way in hell you will find large capacity as cards for like 20 bucks or less online.
-
Riley_TP-Link 🇬🇧
7 commentaires analysés
r/Tapo · C120 and C210 cameras motion detection has become unreliable The subscription mainly adds Rich Notifications and Cloud Storage, along with a few other minor app features. The typical function of the camera will be unaffected by whether or not you have a Tapo Care subscription. I would double-check your detection sensitivities in case they were changed accidentally. I would also recommend making sure that the camera and surrounding sensors are clear of any dust that could affect the sensor. Is the app still making the recordings on time and it is just the notifications that are delayed? If so, consider reinstalling the Tapo App to clear any settings that could be affecting the delivery. I would also check the permissions granted to the app, as settings related to low-power or priority notifications can result in delayed notifications.
r/Tapo · Cant find recordings on SD card, instead a bunch of 256meg mp4 files with blank black videos. This is the expected function of the SD card when looking at it directly. The files leading with xxxxx are placeholders for future recordings and do not have any recordings. There should be some files that have replaced this file name with a date and should contain your recordings though. https://preview.redd.it/65xpzmca5ysf1.png?width=662&format=png&auto=webp&s=1ff7128dbe13ac2a41410cbe27084da8a002c4ee [How can I view the video recordings of camera from the SD card on a computer? | Tapo](https://www.tapo.com/us/faq/94/)
r/Tapo · Where are my Tapo C210 recordings / pictures being stored? I don't have SD card installed nor do I subscribe to Tapo Care. I think that these are being stored within the app's cache for the time being, with the videos and images not moving into your camera roll automatically and instead staying inside of a system folder. I believe that these will expire after a short period and should not be relied on. I think that you can force remove them by either clearing your app cache in your phone settings, reinstalling the Tapo app, or you may try simply just relogging into the app.
r/Tapo · How to connect to the PC? The internet portion is only technically needed for setup and periodic connections. A *network* is needed to see the camera on your PC or locally via the app. Without a network, there is no official way of maintaining a video stream. The only possibility I could even think of is whether a hub could connect to the uni wifi and the camera to that - but it would be easier to just use a cheap travel router at that point. Honestly, in the long term, I would recommend trying to build out your own little network under the Uni wifi. Even if you cannot avoid double NAT, you may have a better experience with your devices - and will be somewhat more secure. I was able to get my start with my smart home under a dual-nat university wifi in my dorm XD
r/Tapo · How to connect to the PC? The cameras are going to only be accessible through the app in this case - unless you just set the camera to record, hope for the best, and pull the SD card later. Essentially, you have to treat the camera like an IP camera - which is required to be connected to a network to interact with and view the live stream of the camera. The best option is to likely use a travel router or some other type of network extender to connect to the camera. The travel router would essentially just take in your uni's wifi network and rebroadcast it for your own use.
r/Tapo · Mass Downloading So sorry to hear. Unfortunately, there really is no option in this case. It would have been possible to remove the camera's SD card and save the video files that way, but with only cloud storage being used, the only method is to go through them individually.
r/Tapo · Can I mount tapo c210 I feel like it may be something that you would want to keep outside of the enclosure if possible. No matter what, it is still an environment that could take an eventual toll on the device. \- It is not an outdoor camera, so it does not have any Dust/Water protection. If the enclosure is dusty, this may take a toll on the camera - especially since it will have moving parts. It could also just dirty the lens and require cleaning. If you have a heating source, you would also want to ensure that it will be safely distanced from it. \- The IR lights will also reflect off of glass, so it may be difficult to get a good night-vision view of the room if the camera is surrounded with glass and the lights are reflecting directly back at it or bouncing around within the enclosure. For your enclosure, if a camera was going inside - I would ideally recommend a C120. Its pretty small, magnetic, an outdoor/indoor camera, and has color night vision beyond IR. Unfortunately it is not a Pan/Tilt Camera so you would lose the view of your room, but as an enclosure camera I think it would be the ideal option. Also, Keep in mind that we only officially support mounting the device to a wall or ceiling with the included mount. If the device breaks from another mounting method, it would fall outside of our warranty policy.
-
All_And_Forever 🇬🇧
3 commentaires analysés
r/Tapo · TP-Link broke the SD cards Actually i had the same formatting error with one of my sandisk cards. It was the same as all the others i installed when i started this. If you didn't mention that i wouldn't remember it. It might be because i used it before... I don't really know why but i could format it and test it on a pc but the camera couldn't format it. I installed another one fresh from the box and it performed great. This cameras seem to be peaky when it comes to micro sd cards...
r/Tapo · TP-Link broke the SD cards If i understood correctly, both cameras have the latest update but one of them is exhibiting this behaviour. You, logically, swapped cards to check if it was the card's fault or the camera reading it. I would recommend that you check those cards on a computer to see how much of its memory is corrupted and then fill them with any sort of files until they are full. See how much real memory they have. You can also check the write and reading speeds just to be sure that they perform well. If they're both on par, then it's really a camera issue. I simply moved away from micro sd cards to the h500. Not that i had any issues with those cards but for the simple fact that they have an "expiration date" and the smaller the card or the bigger the camera's resolution, the faster it will start to give us problems.
r/Tapo · How to connect to the PC? Tou probably can't connect to your network because your camera may only accept wpa2 authentication.
-
AnayaBit 🇬🇧
1 commentaire analysé
r/Tapo · How to connect to the PC? If your camera supports local account you can access via VLC from your computer but you have to connect to your phone first to enable the option, is disabled by default and you have to keep your camera connected to your network
-
throwaway137494 🇬🇧
1 commentaire analysé
r/Tapo · Camera for toddler room I literally just installed a tapo C210 with a 256gb memory card in my nursery last week. I wall mounted it to the aluminum ceiling frame and made sure the lowest angle shows the crib. Enable 2k 30fps and make sure you got good wifi. I got like 5 of these in different rooms. You'll love the features.
-
hi_josie_7 🇬🇧
1 commentaire analysé
r/Tapo · Is there a way to configure a Tapo C210 to record only when it detects motion? https://preview.redd.it/97prywn1tevg1.jpeg?width=1206&format=pjpg&auto=webp&s=56ff1da8416811c7212f778aec6a873b5713699b setting ➡️storage and recording
-
IHATETHEWELSH 🇬🇧
1 commentaire analysé
r/Tapo · no difference between 720p and 2K? aye, this makes sense! would be nice if it was high enough quality to see subtle things (like small layer shifts), but it does a good enough job for me to decide wether or not to cancel the print. gotta love the Tapo “Ecosystem”, can cut power to the printer with a Tapo smart plug 😮💨
-
dariansdad 🇬🇧
7 commentaires analysés
r/Tapo · TP-Link broke the SD cards I don't disagree with your appraisal but I'm talking about a *brand new card* of the exact same model and spec as the one that failed. So, did my *brand new card* wear out in 15 seconds?
r/Tapo · TP-Link broke the SD cards Same but still doesn't explain why the same brand/model/size cards from the same batch no longer work.
r/Tapo · TP-Link broke the SD cards Cool. Thanks for the hate. It's okay that you've simplified in your head what I was trying to explain. I'm not moving the goal posts, I have to explain further details for those that want to point right to the cards. I get it. The cheap cards suck. The fact that I took a card that went bad and tried it in a camera with a known good card and the card still didn't work, replaced the known bad card with the exact same brand new card and got the same results as the bad card should clearly illustrate the story if you were paying attention. You're excused.
r/Tapo · TP-Link broke the SD cards Thanks and yes, I did swap, then pull and test. The card that failed is truly bad but the replacement card (again, brand new, same mfr, size, brand) will not format without error in the camera but will format in my PC. I hate to sound paranoid but I've been through other "features" (bugs) that TP-Link refused to admit but then after a miracle, a.k.a. the firmware update, solved the issue the previous update caused. I have some new Samsung cards on the way for further testing.
r/Tapo · TP-Link broke the SD cards I appreciate the info and the advice however, my cams are not 24/7 recorders and are motion/human activated so maybe 12 to 20 minutes of video per day if that. For other locations on the property I use Wyze cams that record 12-second clips to the cloud. If I needed that kind of surveillance I would install the Reolink I've had in the box for 4 years.
r/Tapo · TP-Link broke the SD cards These cams only record when there is activity so maybe 4 to 5 times a day. This is not an endurance issue; it is a firmware issue. Everyone wants to blame the cards and I get it. They are usually to blame. I cannot accept that after offline formatting and stress testing the cards that they will not work in these $35 cameras.
r/Tapo · TP-Link broke the SD cards I do know that and it still doesn't explain why the same size card from the same vendor, purchased at the same time wouldn't work the same way as the original did for years. I can appreciate you have some knowledge about SD cards and when it really counts, I use top-rated and tested cards. But this is a camera that does light duty watching for ignorant delivery drivers and snooping neighbors. I digress. The point is that the same cards used to work and now they don't. This is the same model/brand of card that is still working in the C210 that came out of the other C210. Cheap, low end cards can and should still work unless someone actually changes something external to the previous operation of the device. I have a SanDisk and a Kingston card that I can try but I shouldn't have to.
-
Carl_TP-Link 🇬🇧
2 commentaires analysés
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. There are some minor hardware differences like a different sensor, a slightly louder siren, and minor differences in the pan/tilt function. the main difference appears to be in the types of events that can be detected. This conversation has actually helped though as when looking at the differences between the C210 and C220 I found issues on the Specifications page. So I am having those reviewed and corrected. Once they are properly displayed I can share with you what the key differences really are and then discuss further how we might improve the camera in future versions.
r/Tapo · Is a used Tapo C210 worth it, or should I just buy a new C200? The C200 is a 1080P camera, whereas the C210 is the 2K version. Buying a used product also comes with a risk. It's not covered by the product's limited warranty. The good news is that a C210, at least here in the US, is on sale and currently is only $21.99 on Amazon. I would recommend the C210 but going with a new one.
-
Gabbie403 🇬🇧
1 commentaire analysé
r/homeassistant · Very disappointed with Reolink right now FYI tapo via frigate works fine 👍 I have C210s
-
Cats_are_Love_1979 🇬🇧
1 commentaire analysé
r/homeassistant · Very disappointed with Reolink right now Yeah I found that one during my initial setup of the official integration. It was gonna be my backup plan, but after hours of determination and fidgeting, i got it working. Have you tried both? What are the pros to the HACS version?
-
SanD-82 🇬🇧
2 commentaires analysés
r/Tapo · simplest way to switch from home/away mode? As illogical it sounds, there's no other way... I really can't think why didn't they enable this feature to be automated or linked to geofencing...
r/Tapo · simplest way to switch from home/away mode? Thanks, I only want to enable home or away mode. I know about privacy mode, but that's not what I'm looking for. For the moment I'm just doing that manually, it's beyond me why Tapo does not enable automation for those (no privacy mode, which basically "turns the camera off")...
-
xDutchGhost 🇬🇧
2 commentaires analysés
r/Tapo · H200 Hub Compatibility With Tapo WiFi Cameras? I was just able to add my C210 and C520WS to the H200 Hub, but not my C220. For the latter is asks me to update the camera's firmware, which is already done...
r/Tapo · H200 Hub Compatibility With Tapo WiFi Cameras? Hi, not that I can recall. I think I just 'attached' the H200 Hub to my network and after that I was able to select the H200 Hub as local storage instead of the SD card. No specials!
-
dinosuitgirl 🇬🇧
1 commentaire analysé
r/Tapo · Delay in recording trigger C425 I have a pretty big mixbag of tapos (I've got rid of all but one Eufy, because tapo don't make a 4g camera, and I can't throw wifi to the end of my drive which is 1.5km from my house) I'm on 26 acres with a small lodge (8 buildings) so I have a lot of ground to cover. Weirdly I'm most impressed with the C120 it's a wired indoor/outdoor USB-c cam. Next fav is the C310 outdoor barrel 12v it's actually a little toooo sensitive, and rain and wind in the trees will set it off. I like the C210 indoor pan and tilt barrel 12v but I've had them go offline more than I'd like... I admit that might me a me problem as they are all situated on the edge of my 2.4gz wifi coverage. The ones I don't love are the C410 and the C425 that I have in places I haven't run 12v/USB to... Even on solar panels, set to max sensitivity they are too conservative and don't catch as much as I'd like and at the same time send too much erroneous notifications 🙄 So I'm working out which of those to upgrade in time. Hope that helps
-
Fez_7 🇬🇧
1 commentaire analysé
r/Tapo · C210 - where is "Digital Zoom" ? Sounds like digital zoom to me 🤷♂️ Not sure what else you're expecting?
-
Organized_Chaos_888 🇬🇧
8 commentaires analysés
r/Tapo · Tapo c225 untimely updates? 2 of my C210s that came as a pair in a single box that you can purchase, updated on different days. So I'm not even surprised. No idea why it happens, but it does.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. Yep, all that is free. I use continuous recording, so you don't miss the before or after of the saved clips. Only wireless cameras don't do continuous recording, due to battery life.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. Yes, it has motion & also person detection. Motion detection is enough, because when you have push notifications on for both, if it detects a person, you'll get two individual notifications. I've not used person detection on any of mine because of that, & it's been great.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. Ambient light or shadows? Shadows definitely trigger the detection, but that's on all of them.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. Get the C210. Even my TC70(older than the C210s I believe) works better than the C220. The C210 does everything that is comparable, better than the C220. I'm probably going to replace the C220 with another C210, as they keep going for very cheap once in a while. Last time I checked, it was only only $69aud for the C210 twin pack.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. Update, the C220 sucks still. Dog barking, I get no notification, but person detected I'm forced to get two notifications. One from motion & one from person. It's really just rubbish in comparison to the C210s & the TC70 I have. They all work as they should. I'd love to be able to leave person detection on, but motion detection off as well. I try not to look at my phone for nothing, so the second notification is simply annoying.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. I just realised, the best answer to how I would improve the C220? I honestly believe they should have just added the C220 detection types/features to the C210 & called it a day. So the fact they changed more than that, only to make it worse, makes me really think I'm right about them going cheaper.
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. I've just posted this in the subreddit you linked. In regards to how I'd improve the C220, it's hard to say exactly because I don't know what's changed on the inside exactly. All I know is that side by side, no one with eyes would choose the C220 over the C210, & most likely the TC70 as well, even though it's 1080p vs 2kUHD. The only way I can think that happens, is they are going with cheaper components or something along those lines. It doesn't make sense honestly. I literally paid less for the ones that are better. Which is not how things are supposed to work. This is probably why I made this post. Confusion.
-
imakesawdust 🇬🇧
3 commentaires analysés
r/Tapo · C120 and C210 cameras motion detection has become unreliable At the risk of sounding like an idiot, where in the settings is that dialog? I've looked twice in the settings for both cameras and don't see it? I'm running Android if that makes a difference.
r/Tapo · C120 and C210 cameras motion detection has become unreliable Replying to my own comment... This morning when I opened those windows, both cameras generated motion events within a few seconds.
r/Tapo · C120 and C210 cameras motion detection has become unreliable Hi. So both cameras are set to record motion events to sd card (no continuous recording). There should have been some motion events this morning when I opened those windows and turned on a fan. In my experience, after registering a motion event, there seems to be a "dead-time" of about 60s where it won't register another one. Based on this, my presence should have triggered 2-3 events per camera. Instead, the C210 registered a single event. There was no phone notification but it does show up in the app under the alarm bell icon and I confirmed that the corresponding video clip did get saved to the sd card. The C120 didn't register any events today until this evening when a car headlight aimed at the window triggered an event. It's all very odd. Since both cameras are behaving weirdly and since they're different models, it suggests that maybe something has become misconfigured. Maybe I'll delete the cache then uninstall and reinstall the app.
-
exel2000 🇬🇧
2 commentaires analysés
r/Tapo · Pan cam c210 has no vehicle or pet detection options? Yeah I realized after that it doesn’t say anywhere on the box that it has those so it’s on me. Just think it’s a bit strange to not have it on some cams. Oh well I’ll still use them and it is a decent cam.
r/Tapo · Pan cam c210 has no vehicle or pet detection options? Yeah, it’s disappointing for sure. I found different uses for them than what I originally planned but seems like something they could add if they wanted to.
-
needchr 🇬🇧
3 commentaires analysés
r/TpLink · Tapo C210 complaining about limtied bandwidth when it only supports a low bandwidth congested 2.4ghz network, what kind of design decision is this? Do Tapo make 5ghz or 6ghz cameras? I live in an area where 2.4 is really low quality, 5ghz likely isnt the best either although it has much more bandwidth, I am having to turn down my Tapo to either 720p or 15fps. :( Interesting you are having to use multiple access points due to the limitation of the cameras.
r/Tapo · Cant find recordings on SD card, instead a bunch of 256meg mp4 files with blank black videos. yeah the dated videos are just all black and 26 mins 12 secs long (if I remember right), and matching filesizes. Luckily I am able to download the videos from the sd card on the app to my phone storage now. although the interface is really disorganised to do it.
r/Tapo · Tapo C210 v3 goes offline every 2-3 days despite showing solid green LED and doesn't even record to MicroSD while it's offline. My C210 also goes offline every 2-3 days, but most of the time it will still record motion detection, however unlike you it shows as offline in my app. Usually I have to either power cycle the camera, or to take the AP down then back up again to regain connectivity, however sometimes power cycling is the only way to bring it back.
-
KingZapp87 🇬🇧
1 commentaire analysé
r/Tapo · Geofencing doesn't work again.. I gave up on Tapo's geofencing and just use IFTTT and have that set up to turn off privacy mode whenever my phone leaves my wifi and vice versa when I connect to my wifi.
-
Downtown-Pear-6509 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 complaining about limtied bandwidth when it only supports a low bandwidth congested 2.4ghz network, what kind of design decision is this? Do Tapo make 5ghz or 6ghz cameras? i have 8 wifi cameras i had to get three separate access points so each can have its own channel. otherwise all mesh systems that put all nodes into the same channel - cant keep up
-
MediocreIndustry3779 🇬🇧
1 commentaire analysé
r/TpLink · My c210 wont connect to my 2.4g wifi, but before it did I've had the same issue and I'm shutting it down. Switching to Xiaomi which never had these issues. It's a shame because tapo have better cloud software.
-
myaaa_tan 🇬🇧🌐
2 commentaires analysés
r/Tapo · Are there any Tapos out there that actually have high bitrate? I have three c210 and have them on 2k resolution and they are very good during daytime, I even used them for a while for a vehicle and license plate detection system and they were great. But on low light they are not that good, any object on the screen that isn't lit up becomes a pixelated mess, panning or tilting the camera causes motion artifacts and even objects that are slightly fast have ghosting issues, changing from 15 to 30 fps doesn't help much but forcing these cameras to night mode alleviates these problems quite a bit. Check out ODM to figure out your bitrate I found out mine are capped at 1382 Kbps don't know if that's good or bad but basing on what I've read on the internet I assumed it's not good.
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. got 2 cameras on 1.4.4 and 1 on 1.3.11
-
bluecat2001 🇬🇧
2 commentaires analysés
r/Tapo · Talk C210 - Is it enough for commercial use ? Wifi connection is ridiculously easy to interfere with. Don’t use WiFi for security cameras.
r/Tapo · Talk C210 - Is it enough for commercial use ? They are capable but don’t use wifi and use a model that can save to hub.
-
Suspicious-Equal-300 🇬🇧
1 commentaire analysé
r/frigate_nvr · Tapo Cameras - Frigate & Tapo App I used to have this issue, but an update to their app and cameras around the beginning of the year fixed that. I've had no issues using a few Tapo c210 and c310 cameras with frigate and their app simultaneously (only have the app as a backup). They work perfect through frigate 15.x. I've been using 16beta2 and 3 and have some issues with the c210 that I haven't figure doubt how to resolve (drop frames, messes with ffmpeg, weird driver vaapi and h264 driver warnings). No issues on 15 though and the c310 still work perfectly fine. Loving the new features in 16, especially canera disable without restart. For what it's worth, unfairly sure the issues I'm having with 16beta is my issue not having trivets or similar setup right (though they worker perfectly in 15), and of course it's a beta release.
-
deadmenrunning 🇬🇧
1 commentaire analysé
r/Tapo · 2x Tapo C210 cameras seem to have bricked themselves within the same timeframe Have you already contacted customer support? Sounds like they either need to provide a fix or replace your devices since bad firmware is on them.
-
DiddysLubeDealer 🇬🇧
1 commentaire analysé
r/Tapo · H200 Hub Compatibility With Tapo WiFi Cameras? The C220 is compatible but the C210 and TC70 are not compatible, this comes from their website though. I believe they intend to make all the cameras compatible with the hub eventually but the date for that keeps getting pushed back along with the release of the H500 hub. The current date given on their website says compatibility will be brought to all non-compatible cameras in April 2025, but that’s been getting pushed back every month for a few months now so take that with a grain of salt.
-
Kid_Stereo_Ltd 🇬🇧
2 commentaires analysés
r/Tapo · Question about camera motion tracking (tapo c210) It returns to the preset camera view after a certain amount of time, I’m guessing after the motion stops.
r/Tapo · Pan cam c210 has no vehicle or pet detection options? I just checked mine, and you are correct there are no vehicle or pet detection options. Perhaps you could make an area with the motion detection to detect the cars or pet area?
-
VisibleMammal 🇬🇧
1 commentaire analysé
r/Tapo · Question about camera motion tracking (tapo c210) Asked on the official forum, that is the case yeah. Thanks though
-
J0NICS 🇬🇧
2 commentaires analysés
r/TpLink · Tapo C210 Local Playback Problems Has your can received update 1.4? I have two C210s abd I noticed that one kf them is now running at 1.4 while the other is still at 1.3 and aint receving new updates. Weird thing about the one with 1.4 is that it disconnected itself from my network. I had to manually reset it and set it up again. Thats when I found out that its running at version 1.4 now, and its performance is way smoother.
r/TpLink · Out of curiosity: when was the last time your Tapo camera received a firmware update? I have two cameras in my house. Same model(both C210, hardware 2.0) Weird thing is one is updated to version 1.4, while the other is still at version 1.3 and aint receiving any updates. Which sucks coz the one with version 1.4 performs way better now compared to its previous version.
-
This-Is-Not-Nam 🇬🇧
1 commentaire analysé
r/Tapo · Using multiple tp link software on cameras Thanks for that information! I got it working now on the other phones now using your suggestions. I noticed that the firmware is newer on one camera than the other three I have. The firmware is 1.4.2. With that version I can change the frame rate from 15 fps to 30 fps. The other three have firmware version 1.3.11. The frame rate on those cameras cannot be changed. I tried updating the firmware within the tapo app and it's saying the firmware is up to date. That sucks, since all the cameras are about maybe 3-4 months old. Bought them all from Amazon Guess I got old stock.
-
xtimeport 🇬🇧
1 commentaire analysé
r/Tapo · Using multiple tp link software on cameras Me and my wife using these way without problems.
-
LoiLee 🇬🇧
1 commentaire analysé
r/Tapo · Confirmation or Notification When Enabling/Disabling Alarm Don’t know if your model let you, but it could have “camera manipulation detection” turned ON. You can disable it or set sensitivity to minimum.
-
HungryFries 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues I’ve been having this issue for months. I bought the Tapo C210 and everything was great for the past couple of months and suddenly when I tried to watch the previous videos in the SD Card, it says “No MicroSD Card.” The sd card I have is the bundle where there’s an sd card. I tried formatting, it will work for a day or two and then when I need to watch something important, no sd card again. I already formatted, rebooted, unplugged, updated, removed the sd card, brushed it, but no use. It’s still happening. Is it because of the Sd card? If it is then are they requiring us to pay the monthly storage subscription? I’m planning to buy another one but if this will happen again I might consider using a different sd card or a different brand of cctv.
-
Remarkable-Set-4710 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Did this happen again after? We have a camera like this and it's rotating at some points to it's maximum left, and then centre and top, all the way up. But it was also making weird noises on the saved video. We started believing itay be some ghosts 😂 we use the camera for my grandma who is dying and she is insisting there are constantly people around her hence why we started believing they may be messing with the camera. But I just wanted to see what else is possible
-
Intrepid-Sir9008 🇬🇧
2 commentaires analysés
r/TpLink · Tapo C210 moving on its own Yes mine too! The camera pan on its own and recorded around the house. Could it be the employees infringing our privacy and voyeurism from cctv?
r/TpLink · Tapo C210 moving on its own Yes mine too! The camera pan on its own and recorded around the house. Could it be the employees infringing our privacy and voyeurism from cctv?
-
Claudific 🇬🇧
2 commentaires analysés
r/Tapo · Tapo C210 cannot record/format Memory card As stated I already tried reformatting from the application as well as from a MacBook but still showing this error.
r/Tapo · Tapo C210 cannot record/format Memory card Already done that as stated in the post. After formatting it in exfat the tapo c210 still requires to format the card.
-
AthosBRA 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 cannot record/format Memory card Hi! I’m facing the exact same issue, verbatim. I just moved into a new 3-story house and bought a setup of 5 Tapo cameras (4x C200 and 1x C210) to monitor my daughter with ASD (Autism Spectrum Disorder). I also bought 5 MicroSD cards, same model as yours, same size and I now strongly suspect are fake. I spent over $200 USD (around R$ 1,000 in Brazil) on these cards, and the cameras either won't format them or show that same "expanded capacity" error you’re seeing. Because of this, I’m now torn between three paths: 1.Buying High-Endurance Cards: Trying again with verified SanDisk High Endurance cards, but I’m honestly traumatized by the fakes in my local market and the high cost in Brazil. 2.Tapo H500 HomeBase: I’m considering centralizing everything with the H500 and a 1TB SSD. However, here in Brazil, the H500 is extremely overpriced, costing about $360 USD with import taxes (R$ 1,800). It’s a massive investment. 3.Tapo Care: Just giving up on local storage and paying for the cloud subscription to avoid the hardware headache. Are you leaning towards any specific solution? I’m really leaning towards the H500 just to be done with SD cards forever, even if it hurts my wallet right now.
-
Ok-Alternative-748 🇬🇧
2 commentaires analysés
r/TpLink · advice on camera choice C210 is best for all round, with pan tilt, 2k, and dome shape. You said you like C100 or C110's size. If you need pan tilt which you don't C210, if you don't, C110. C110 and C100 are the same, but C110 has 2K 2000 pixel quality C100 has 1080p 1080 pixels. And 3MP May I ask what this camera is catching? If you're concerned a random person might come through, you want C110 for 2k, it'll be substantially better visuals. I'd it's just general go see who's going up and down, then go C100, though if you need to see if someone dropped something small like keys, C110 will be able to see them better. TL;DR: C210 for pan tilt and 2k clarity, C110 for 2k clarity and seeing finer details better without pan tilt, C100 for general views but won't pick up finer details. My pick is C110, or C100 if you want to save money.
r/Tapo · Tapo C210 cannot record/format Memory card That’s a scam, the Sd card isn’t working because Tapo have a strict limit for Gb, but Mac’s just read the fake 128gb on a 2gb chip and take the lies. Here’s an overview from Ai for closer up details as I’m not good at explaining! Disclaimer: The text below is Ai Generated, therefore it may not be accurate or appropriate - if you do not like or condone the use of Ai, simply do NOT view the comment below! The proceeding comment/text is Ai generated. That exact error (**"unusually expanded capacity"**) means the micro SD cards are **counterfeit/fakes**, even if the shop looked legit. **The Scam:** Fake cards hack the firmware to show "128GB" on your Mac or phone, but they only have about 4GB–8GB of actual storage. **The Tapo Check:** The Tapo camera runs a real hardware write-test during formatting. It detects the fake size immediately, fails, and locks it at 0.00 GB to protect your data. **What to do:** 1 Run a free tool called **F3 (Fight Flash Fraud)** on your Mac to test the card's real size. Use the results to get a refund. 2 Buy a **SanDisk High Endurance** or **Samsung PRO Endurance** card, ensuring it's sold directly by the retailer and not a third-party marketplace seller.
-
Material_Button_951 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 cannot record/format Memory card Use a computer to format the card in ex-fat format, then put it in the camera to reformat it again.
-
Healthy-Ad7380 🇬🇧
2 commentaires analysés
r/Tapo · How to connect to the PC? I can't connect it to the wifi, it's wpa 3, and it's not mine so I cannot modify the router, it's from my university
r/Tapo · How to connect to the PC? I was able to connect the pc to the account using a mobile hotspot, but I need it to be able to connect to the pc without the hotspot https://preview.redd.it/t7vlgtps9o3h1.jpeg?width=1036&format=pjpg&auto=webp&s=af052c20687e22254f5e5bbc2853bde216f65606
-
rsgsingh 🇬🇧
2 commentaires analysés
r/TpLink · TP-Link Tapo C210 used Outdoor? Been using it for a year now without any issues. Actually now I have 2 outdoor C210. They've seen Winter, Summer and Rain. Camera is just under the deck, so it doesn't get wet directly, but experiences all weathers.
r/TpLink · TP-Link Tapo C210 used Outdoor? I'm using Tapo C210 outdoor under shaded area for 4 months and no issues so far.
-
lunarstatic44 🇬🇧
2 commentaires analysés
r/Tapo · Tapo C210 (as mentioned on the back of the camera) stopped working. Only IR lights turn on when I power on the Camera. I woke up one morning a few weeks ago and they were offline. I’ve done everything I try and reset them but they will not connect to my wifi!!! I don’t know what to do. :(
r/TpLink · Tapo c210 issue I just woke up one day and my two cameras are not connecting to my wifi anymore and I can’t figure out why ! I’ve done everything to reset them up.
-
Oakmontowls 🇬🇧
1 commentaire analysé
r/Tapo · Using the tapo app through tailscale Sorry I should have specified, due to how the tapo camera works, I can't use all of the features of the camera like talk back from the rtsp feed. That is only available while using the app.
-
Any_Noise_235 🇬🇧
1 commentaire analysé
r/Tapo · Can any inside cameras be set to be on overnight & off in the day? If a manual switch is OK for you, you can switch the camera on and off simply with a TAPO button (if it's out of sight of the camera).
-
ShibDip 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Has this been answered? I heard it move at 4am when in privacy mode
-
mateeos 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Same thing happened to me as well. At 2am, while I was sleeping, I suddenly heard my can turn to face me. It’s never done that before.
-
Southern-Squirrel109 🇬🇧
1 commentaire analysé
r/Tapo · Tapo camera randomly ‘unable to establish streaming connection’ It resolved on its own around the same time as other users so I assume it was a Tapo issue!
-
Dhruv3159 🇬🇧
1 commentaire analysé
r/Tapo · C210 camera stopped working on Google Home Try to download the older version ? The version u were using before
-
oobiic 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues I have some C100s and one C210. They all use the same Toshiba 32GB microSD cards, but the C210 constantly fails to detect the card. It was okay in the first month, and then it would keep failing after that. Firmware is up-to-date. Just posting here for reference.
-
hellvice 🇬🇧
1 commentaire analysé
r/Tapo · simplest way to switch from home/away mode? Following this thread. This is my biggest deception so far with the setup.... The "Home" and "Away" switch can't be automated, I guess because the geofencing feature is still in beta, which would make sense, but AT LEAST make those available to be added as Widget in the meantime or something!
-
malki666 🇬🇧
1 commentaire analysé
r/TpLink · Is a used Tapo C210 worth it, or should I just buy a new C200? I've been using both C200 and C210 for several years, no problems. Just be aware that C200 firmware won't allow it to connect to the H500 hub. C210 is fine with updated firmware. Just bought a new higher resolution C230, it connects perfectly, but not checked quality etc yet, only had it a day.
-
Open-Flatworm8762 🇬🇧
2 commentaires analysés
r/TpLink · Tapo C210 Camera - Can I turn ON privacy mode ONLY if I am home at a specific time? ah, so you can't control the notification over geofencing, but you can schedule the notification per device, example: your cam only notify you between 22:00-05:00 but record all the time 24/7
r/TpLink · Tapo C210 Camera - Can I turn ON privacy mode ONLY if I am home at a specific time? and that was your question... "can I turn ON PRIVACY mode ?" so it turns on privacy on the camera(s) and you can create a second automation where you turn off privacy when you want to.
-
DoctorQuinlan 🇬🇧
3 commentaires analysés
r/TpLink · Tapo C210 Camera - Can I turn ON privacy mode ONLY if I am home at a specific time? Oops my bad. I had a different post about just turning notifications on/off since privacy mode stops recording. I want it to record ALL the time but only notify me if I am not home/asleel.
r/TpLink · Tapo C210 Camera - Can I turn ON privacy mode ONLY if I am home at a specific time? That only toggles privacy mode whic would turn the whole camera off
r/Tapo · Tapo C200 or C210? Looks not bad. Why are they better than 210s? 210s can move/pano but they are a little bulky. I just set one up the other day and it’s been okay so far
-
ilovea1steaksauce 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C200 or C210? Get the c113s. They have the best overall performance that's why I bought them initially due to various other little things similar to these complaints about the c210. My c-113s have functioned flawlessly. Motion detecting is a little haywire even with sensitivity down but, I usually keep motion detection off and people detection on. They are indoor outdoor and have the good infrared night vision and amazing video quality. They have a decently wide field of view.. besides I have bought four of them and I was considering the c210 for indoor cameras but, for the same price I can get a c113 so, it's The logical choice for indoor even
-
purespeed44 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 Camera - Can I turn ON privacy mode ONLY if I am home at a specific time? I have the C210 and I can turn privacy mode on and off and anytime through the tapo app
-
AnotherJad125 🇬🇧
3 commentaires analysés
r/Tapo · SanDisk 64 GB high endurance card incompatibility And no, its not the SD card itself, I may or may not have bought (waste of money but I wanted to know) another High Endyuance 64 GB and tested it, same thing happened like the first one...
r/Tapo · SanDisk 64 GB high endurance card incompatibility I've tried an SanDisk Ultra 64 one and it works, just this very very specific type and capacity just somehow refuses like Vegetarians are to meat, they can eat it but they just don't want to for some reason 💔
r/Tapo · SanDisk 64 GB high endurance card incompatibility Did the same thing, formatted it too in my laptop and pc, used both Rufus and guiformat, made I tried fat32 placed it back in the camera, reformatted in the camera atleast 5 times then repeated it atleast 4 more times. I also tried exFat, still doesn't work since I'm pretty sure the camera is trying to make the Sd card into a fat32 format...
-
SugarrrSugarr 🇬🇧
3 commentaires analysés
r/Tapo · C210 camera stopped working on Google Home it won't work anymore and won't be fixed ;)
r/Tapo · simplest way to switch from home/away mode? Not possible, no idea why they are refusing to add it to automations actions xd
r/Tapo · Tapo C210 a "2k camera" has lower bitrate than C200c a 1080p camera yeah they lowered bitrate for some cameras with updates, it's on purpose to lower bandwidth on their servers
-
YannickGaultier 🇬🇧
2 commentaires analysés
r/Tapo · simplest way to switch from home/away mode? \> ACTION … Send notification message If you do that, you can only send a textual message, which is of course of little use. Knowing we're home or away was never the problem. The problem is to trigger the proper actions when we know we're home/away, ie adjust detection, alarm and notifications settings. Again, I can now see this is not possible.
r/Tapo · simplest way to switch from home/away mode? I have not found home and away modes as automation targets, only privacy mode. Options I see are: - privacy mode on/off -play sound - motion tracking on/off If you have a way, please provide a bit more details (I do have tapo care for that camera)
-
Illeazar 🇬🇧
1 commentaire analysé
r/TpLink · Tapo Camera SETUP on local network Did you ever get an answer on this? I recently grabbed a couple Tapo C210's, and I set them up with internet access, then used parental controls to remove their access to the web but only allowed them on the local network. When I removed web access, they no longer connect to the app, but I can still use rtsp and onvif with them. Im just worried about in the future if they will be bricks if I need to update their configuration last what onvif can do, and tapo isnt maintaining their server anymore. I want to find a way to access their configuration locally.
-
Not_my_Name464 🇬🇧
1 commentaire analysé
r/Tapo · Wi-Fi issue with both my Tapo cameras Try turning UPnP off under Advanced Settings and when accessing cameras via app, wait for the app to properly load before going into the camera you want to view. I know, it sounds stupid but, I found the camera would go offline if I went into the camera too quickly - it's almost like the app retains something in the cache from the previous session and if you switch too quickly it reacts like your attempting multiple connections at the same time.
-
yemkay 🇬🇧
1 commentaire analysé
r/Tapo · Wi-Fi issue with both my Tapo cameras I noticed this WiFi issue in all my cameras. I ended up connecting them with LAN cables. One option you can try is to schedule daily restart for your cameras, which will be helpful when you're away.
-
ElectricalEmu69xx 🇬🇧
1 commentaire analysé
r/Tapo · Wi-Fi issue with both my Tapo cameras It seems more than a few things can mess with them, for me it was turning off “Beamforming” in my mesh system. Now everything is working.
-
Global-Library-4765 🇬🇧
1 commentaire analysé
r/Tapo · Wi-Fi issue with both my Tapo cameras I had the same issue, reached out to support and they came back with the following. Step 6 worked for me: 1. Make sure both the Tapo app and camera firmware are up-to-date. 2. Confirm your router has an active internet connection when the issue occurs. 3. Restart the Tapo app. Reboot your router and the affected devices. 4. Disable router settings like client isolation, firewall, and access control, as these can sometimes block devices from staying connected. 5. Move the camera and chime closer to the router to ensure they are receiving a good Wi-Fi signal. Reduce any obstructions or sources of interference, such as microwaves, Bluetooth devices, or USB 3.0 equipment. 6. Set your router’s 2.4 GHz Wi-Fi to channel width 20 MHz and channel 11. 7. Disable Smart Connect, Wi-Fi Optimizing, or Channel Optimization features on the router, as these can sometimes cause devices to disconnect. 8. Try to connect the camera and chime to a different 2.4 GHz network or a mobile hotspot to see if the problem persists. 9. If the issue continues, consider resetting and reconfiguring the affected camera and chime.
-
jiayihu 🇬🇧
1 commentaire analysé
r/Tapo · H200 Hub Compatibility With Tapo WiFi Cameras? Hi, I’m trying to pair my C210 to the H200 hub my it’s not able to find the Hub when setting local storage. Did you do anything special to make it work?
-
Responsible_Hippo832 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues Maybe its true their tapoo is so hard to match anysdcard
-
DifferenceRelevant25 🇬🇧
1 commentaire analysé
r/Tapo · C210s switch on according to the removed automation I reset both of them and changed their names, as I mentioned in my post, but it didn't help.
-
Tasty_Process 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Did you ever get to the bottom of this? Mine just did this to me at 11pm randomly as I’m sitting in my living room. I’m terrified. No settings on that I can see
-
stevenc88 🇬🇧
3 commentaires analysés
r/Tapo · C210 - where is "Digital Zoom" ? So I've been in contact with Tapo support. They told me that the C211 and C210 have the same HW inside, just the color is different. The marketing information for the C211 is wrong - they both support Digital Zoom, but only through the "pinch" function of the app. So if you are using rtsp: like me, you are out of luck on any zoom settings within the camera - all zoom functions are in the Tapo app only.
r/Tapo · C210 - where is "Digital Zoom" ? I expected the digital zoom to be part of the camera, not the app, just like pan and tilt are. I want to monitor something relatively close-up, and want that zoom level to be retained in a "Viewpoint" (in the app it's basically a preset) so when I come back to the app and view the camera, the zoom is already there. I'm OK with losing some resolution (which is part of a digital zoom), but I want it to be in the camera, not the app.
r/Tapo · C210 - where is "Digital Zoom" ? Yea, that works. But it also works for the C211 which claims not to have digital zoom. So I am looking for something else maybe.
-
j_deth191 🇬🇧
1 commentaire analysé
r/Tapo · C210 - where is "Digital Zoom" ? Yup that's digital zoom. In theory cameras that list it *should* be clearer at the same zoom level than those that don't. With the 4k cameras there's AI zoom on the live view that is clearer still (but it is only visible on live view and cannot be adjusted in terms of zoom amount, just moved throughout the picture. Basically unless a camera has an optical zoom it's all done via software and is nowhere near as clear so is largely used for marketing purposes.
-
Express-Street7382 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues Yeah, I'm starting to deal with the same BS now after about 6 months.
-
Regisnox 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues You can also connect to camera locally directly and try to format card and then drop the firmware on the card. They screwed firmware and that what the only issue.
-
TekWarren 🇬🇧
1 commentaire analysé
r/Tapo · Tapo care cloud storage alternatives The great thing about these cameras is you can enable rtsp... Accept on battery cameras I believe. That means you can set them up to record to literally NVR type software. This was one of the main reasons I left wyze.
-
lyahsmom 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Thank you... I've been searching if anyone had those issue. I've checked mine and auto update was on but I have a feeling someone is watching.
-
LiveDocument3521 🇬🇧
1 commentaire analysé
r/Tapo · You have viewed the live video for 5 minutes without any operation. Continue the viewing? That’s incorrect. We get notifications NONSTOP every 5 minutes. We never touch it. We use an iPad just for this and prop it up on a stand. It’s so annoying we have to get up every 5 mins to click continue lol. If Tapo does not fix this I’m seriously throwing this camera in the bin and getting a new one. Ridiculous!
-
Alert_Put_5785 🇬🇧
1 commentaire analysé
r/Tapo · Pan cam c210 has no vehicle or pet detection options? Sucks I didn’t check this first. I wanted for pet detection. I don’t want to record all freaking day when I’m home. Grrr already screwed in an installed.
-
Shoruk3n 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 flashing bright red light every now and then I had this issue too, I think it may be an indicator that the SD card is full. Mine stopped flashing when I formatted the SD card.
-
photonGravity 🇬🇧
1 commentaire analysé
r/BuyItForLife · Why did we accept that security cameras need monthly fees to work properly? Tapo C210. I added 128gb memory cards. 24/7 recording with motion and human events. No monthly. Paid ~$55 to set up two cameras this way a few weeks back.
-
Hamanr3n 🇬🇧
1 commentaire analysé
r/Tapo · Lap in the video...why☹️ True, they need to improve that part, I have inserted Sandisk 256 GB microsd from the extreme series and the videos are not fluid, likewise the recording in the cloud, I recently improved the internet and now it is 300 mbps and 50 mbps upload
-
Popular_Detective_80 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 flashing bright red light every now and then Hi, I am facing the same issue and getting paranoid about the possibility of someone having hacked into my cam. For me when this happen, it persists for several minutes. Has anyone found a solution?
-
the_fabled_bard 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 a "2k camera" has lower bitrate than C200c a 1080p camera Wow that's just plain evil. Ty!
-
Free-Spirit012 🇬🇧
1 commentaire analysé
r/TpLink · Over The Last 6-12wks, I've Purchased 5 Tapo Indoor Cameras Of Three Generations. Here Are My Thoughts. What about a C120? I’ve read things like ambient light changes triggering the motion detector of the C210
-
throwaway_batman_ 🇬🇧
1 commentaire analysé
r/Tapo · C425 always going offline Similar problem with my Tapo C210. Have you managed to resolve it permanently?
-
basimus 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues i think they're purposefully corrupting our cards so we subscribe to their cloud service
-
Big-Construction-431 🇬🇧
1 commentaire analysé
r/Tapo · Talk C210 - Is it enough for commercial use ? I get the concern with WiFi, but let’s be real even Ethernet isn’t immune. Cables can be cut, power can be shut off, or the network gear can be tampered with. No setup is completely interference-proof. Wired is more stable, sure, but saying WiFi is useless feels like an exaggeration, especially when local recording can still keep things running even if the signal drops
-
AM000001 🇬🇧
1 commentaire analysé
r/Tapo · Talk C210 - Is it enough for commercial use ? Even if WiFi is strong ? Should avoid this option ? I don’t think they have a Ethernet conexion on the C210
-
owldown 🇬🇧
1 commentaire analysé
r/homeassistant · Tapo Cameras without using TP-Link at all? I'm not here to change your mind, and I think folks have covered the setup for RTSP, but I'm really impressed with the Tapo app. The built-in motion and person detection in the camera is streets ahead of what I've been able to get out of frigate, which thinks flowers are people and cats are dogs. I block some stuff, but I've (naively?) decided that the trade-off is worth it.
-
neonnatal86 🇬🇧
1 commentaire analysé
r/homeassistant · Tapo Cameras without using TP-Link at all? I also have assigned a static IP and blocked those IPs from the Internet access. However, if I'm on the same Wi-Fi, the app loads the stream. If I'm not on the same Wi-Fi or on cell data, all cameras show offline. So it seems the app tries to load local first and then goes to the server.
-
martthie_08 🇬🇧
3 commentaires analysés
r/Tapo · Tapo C210 false person detection alerts It has somehow gotten better in the last weeks on my end. But I‘ve also a lower sensitive for positive alerts, meaning it takes longer now for a person to be detected.
r/Tapo · Tapo C210 false person detection alerts thanks, I'll try lowering the sensitivity, it was on "8" I'd like to try to avoid relocating the camera because it covers an ideal field of view as is.
r/Tapo · Tapo C210 false person detection alerts thanks for posting, ok, just weird that last year I didn't have as many false alerts.. I'll see if I can skip the Tapo person detection and have my NAS do it.
-
Redararis 🇬🇧
1 commentaire analysé
r/Tapo · What are the security consequences to me if my Tapo camera is stolen? more and more tapo cameras support storage at hub. My c210 supported this just last week. Check your latest firmware.
-
VelvetRockstar 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 Yes, i have 2 c210 and a c212 on my app without any hub they all work well in the same wifi
-
jomsjoms 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C325WB for indoors? C210 doesn't have a wired LAN connection nor a POE which i both need
-
Pleasant-Hat9636 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Hi, did you get to the bottom of this? My camera has been in privacy mode in my bedroom for a few weeks and I manually had it looking towards the wall. I just woke up at 4am and the camera did the same thing! Turned itself to look directly at the bed (position 1) whilst still in privacy mode! (it did say firmware update required when I first opened the app, then it said up to date as auto-update was on. Just strange it didn't pan but sent straight to position 1....)
-
Grippenripp 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 false person detection alerts Oh yea. Turning down the sensitivty doesnt work and I may miss some actual people. I have a giant palm tree north of the sun and I get notifcations all day when its windy. Nothing much I can do about it just check footage and move on. I use do not disturb at night on windy nights.
-
kapilmahawar 🇬🇧
2 commentaires analysés
r/homeassistant · Which Integration for TP-Link/TAPO C210 Camera? Yes JurajNyiri one. Official one is not needed.
r/homeassistant · Which Integration for TP-Link/TAPO C210 Camera? I am also using the same addon with c210 and motion sensor is very responsive in well lite space. But sometimes misses in dark.
-
mrbush77 🇬🇧
1 commentaire analysé
r/TpLink · My c210 wont connect to my 2.4g wifi, but before it did This thread was helpful for me, I did the same thing: deleted the app and downloaded a newer version. Power cycled the Tapo camera as well as my router (linksys E2000). I had to try twice after doing so, but it did work. This was after I had checked that it was set to the 2.4 GHz band, not the 5 GHz.
-
dududu18 🇬🇧
1 commentaire analysé
r/Tapo · Tapo C210 - shorter clips I am recording on microSD and don’t have that option :( thank you though
-
Tiago28 🇬🇧
2 commentaires analysés
r/Tapo · Motion detection but no able to access recording It worked again after I formatted the SD card, but I lost all my footage...
r/Tapo · Motion detection but no able to access recording It worked again after I formatted the SD card, but I lost all my footage...
-
Exact-Art6906 🇬🇧
2 commentaires analysés
r/TpLink · Tapo C210 moving on its own There were no updates for us at the time. Usually, when the camera goes through a restart, it does a lock to lock turn in every direction and thats what scared us that night: it just turned from facing the wall to facing our bed..weird stuff
r/TpLink · Tapo C210 moving on its own Know this was posted 7 months ago but did you ever figure it out? We had a not-so-nice surprise this night when the camera turned about 90 degrees towards directly towards our bed.
-
crybz 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own I have had this happen right now. We use the cam as a babycam and it was plugged in but turned away and privacy mode on. Right now, when everyone was asleep it starts turning without any status lights on. Scary stuff. I unplugged immediately. One thing I noticed tough, the tapo app sent a notification an hour before, that the cam had new firnware. It might be possible that it auto-updated and do its initalization move. Still, the whole situation was stressful in that moment as it felt like someone hacked it.
-
sk_3017 🇬🇧
2 commentaires analysés
r/TpLink · Tapo C210 micro sd card issues This worked for me too. Thanks.
r/TpLink · Tapo C210 micro sd card issues https://preview.redd.it/3g2c0m7nj7ge1.png?width=2201&format=png&auto=webp&s=044882422d8510797b895dcc2a25d9ba446fe94f Formatting like this worked for me
-
StarkInLostEchoes 🇬🇧
2 commentaires analysés
r/Tapo · Tapo Camera Geofencing / recommended settings I was using IFTTT on my previous device and the settings were affecting the battery life. Now I have a Galaxy A55 and when I tried to enable those two IFTTT applets, they didn't even work (for some reason I could not figure out) so I have abandoned this altogether. I'm just using some Tapo routines that are triggered by one of my Tapo smart plugs and some time schedule I have set up. So e.g. I have a light on my living room that is being turned off every night at 02.00 (via the Tapo smart plug). Or earlier if I say "Hey google turn the xxx light off". That's when I go to sleep. I have a Tapo routine that turns the camera on (privacy mode OFF) when that light is turned off, etc. These routines do not cover more than a 50% of I'd like to to do, but I guess I got tired of trying to find a viable solution and I stopped caring that much.
r/Tapo · Tapo Camera Geofencing / recommended settings I'm on Android. I got it working with the above settings. Enhanced Location enabled, Accuracy set to Balanced and Frequency 30s. Sometimes it does need its time to understand that I have arrived or left the set radius to work though. Another issue here is that Tapo's Geofence by itself only offers "when I leave home / when I arrive home" automations. I wanted to cover cases where for example I'm at home sleeping and would like to the camera to be ON. So I ended up using IFTTT's two free applets. My Tapo camera turns OFF when my mobile phone connects to my home's wi-fi and turns ON when my phone disconnects. [https://ifttt.com/connect/android\_device/tplink\_tapo](https://ifttt.com/connect/android_device/tplink_tapo)
-
matty8199 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 camera can't be accessed through VPN would there be a way to fix this? i just bought two tapo cameras to test out and am having the same issue. i have no interest in leaving them open to the internet but they’re kind of nerfed in unicam (ptz doesn’t work and i haven’t been able to get the two way audio working ejther).
-
Z1L0G 🇬🇧
1 commentaire analysé
r/homeassistant · Best wifi camera that is local? where are you getting that from? A quick Google shows loads of people using C120s with Frigate. I haven't got any myself but I'm successfully using C320s (outdoor) and C110/210s (indoor).
-
weirdshitblog 🇬🇧
1 commentaire analysé
r/Tapo · Cameras starting to work in google home after firmware update ? [Tapo C120] I have a C210 and it was working in GH last week, but I added a new C110 today and now neither works in GH. Not sure what happened there.
-
Starcountryball 🇬🇧
1 commentaire analysé
r/Tapo · Tapo camera glitch Hello, just a update - The C210 randomly unplugged and no motion was saved. The last detection saved by the cam was at 6:25 PM Philippines Standard Time just before the plug probably fell off. About the issue of the light changing - I have a strong WiFi and it displays green strong wifi in Tapo app. And the camera had been restarted twice by unplugging and plugging. https://preview.redd.it/l7ozqzatf4fe1.png?width=720&format=png&auto=webp&s=7d48b4b8b1fc0c3019c949caf5e536b0a5f8e32f
-
EchoGecko795 🇬🇧
1 commentaire analysé
r/Tapo · Tapo c210 or C220 I have a C200 and a C210, the zoom is much better on the C210, but you don't really see the difference otherwise.
-
MyMango88 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 - No sound detection? I currently have Tapo 210 it was one of the only cams with 114 vertical pan. Would love even more than that, but this is the most that I can find (Nest aside older version discontinued) and why I had to get a different one. I don’t love that it doesn’t auto record when there’s sound or movement detected like D-Link does. It only does a still photo capture but it’s a bit late, it’ll say person/ movement detected, but nothing’s there so it’s almost like it misses the capture moment. Picture quality is outstanding however. As well as pan capabilities. With Tapo I have to turn the human detection feature off otherwise it goes off every five seconds. Which means that I can’t detect if a dog is moving around. And because it doesn’t pick up Barking notification it’s kind of useless other than viewing in the moment. Does anyone have any comparisons to the newer D-Link models? Or will I have a better experience with TAPO C225 model - for what I’m needing. Thank you :)
-
shadewood_mole 🇬🇧
2 commentaires analysés
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. Thanks for that. I've had an email from support saying that "all my cameras are up to date" despite them being on three different firmware versions! It appears the hardware V1 cameras may never get the 1.4.x update? Have to wait and see but it's a very slow roll out!!
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. Has anyone seen any movement recently? I had one of my four C210 cameras updated from 1.4.3 to 1.4.4 in the last few days but the other three are still at 1.3.11 or 1.3.14. The 1.4.x upgrade made that camera appear directly in the Google Home app. but the others are not showing. What is taking so long to roll out? By the way two of the cameras are v1 hardware. Will this limit the version of f/w they will receive?
-
NullIsUndefined 🇬🇧
1 commentaire analysé
r/TpLink · Questions before buying Tapo Cameras We use a different non-wifi monitor that you can just plug in and watch on the screen it comes with (no phone required). Smart baby brand I believe. We also have a second camera set up, and that is the Tapo c210. Since it was so cheap, and we wanted a way to record video. So it's a good add on to an existing non-wifi baby monitor, IMO. But I don't like it as a standalone one because you can't use your phone at the same time. However, if you have an extra tablet you don't use much, I could see using the c210 as a full time monitor. The major downside is, when you travel. You need to use a wifi or wired LAN connection. Not sure you could get it to work easily at a hotel, Air BnB, etc. would even be a hassle to reset it and set it up at a family member's home. But doable, if you know their WiFi password and everything . Would probably only take like 10 mins to reset it and and set it up for a different home. Just not plug in and go, like the good old days. 😂
-
McGondy 🇬🇧
2 commentaires analysés
r/Tapo · So I am soon going to be part of Tapo Family ,needed some advice ! Oh, what kind of data does the QUBO plug offer? I'm looking for power usage (above or below a threshold) as a trigger? Person detection is pretty good on the cameras, although I only use my C210 as a nanny cam - I find the higher grade models perform better (C225 > C120 in terms of night person detection) in my limited anecdotal experience. Download of clips only seems to work while on the same network, so no remote/isolated VLAN. So I guess you could screen record while playing back a video as a hacky work around in a pinch. I haven't used the paid cloud option, so that could work for you if you are not onsite and willing to pay I haven't tried blue iris with Tapo gear, but I presume it would work as they are usually compatible with RSTP but you'd probably loose onboard AI.
r/Tapo · So I am soon going to be part of Tapo Family ,needed some advice ! Sure can. All smart actions have an *Effective Time*, which can be an absolute time or sunrise/set with and optional ± offset.
-
Sheermun88 🇬🇧
1 commentaire analysé
r/Tapo · Tapo c210 wifi won't connect Adding a bit to OK-T below - many of the new routers use an option called Smart Connect. This allows the router to share the same SSID on the 2.4 and 5Ghz bands. This allows a device the option to choose which band to connect with. Unfortunately, there are a lot of devices out there that do not like this option. In order to address this issue, the other option is to configure the router with an SSID for the 2.4 band, and a different SSID for the 5 band. Another possible problem people have been dealing with is the routers' ability to AUTO select the actual channel(s). Most new routers do this by default, but this has also caused issues on a variety of devices. Look up Smart Connect or Auto channel, and you will see/read lots of discussions on this topic. Should you open a support ticket, no matter what, one of the first things they will tell you is to ensure your camera and App device (phone) are using the same SSID. The only way to do this is to have separate SSIDs. Take your phone for example. It will evaluate the signal strength of available networks on both bands, typically prioritizing the band with the strongest signal, and a few other settings. If a router broadcasts separate SSIDs, the phone will choose accordingly. The camera will only connect to the 2.4band no matter what. And what happens if the 2.4 band on the router is too busy - slow speeds, connection drops, lagging, and poor performance.
-
Ok-Team5827 🇬🇧
1 commentaire analysé
r/Tapo · Tapo c210 wifi won't connect On Xfinity modem that that you are broadcasting 2.4GHz wifi. It that doesn't work there is a setting to broadcast separately, try that and put an obvious name to the 2.4Ghz SSD that way you make sure you are trying to connect to the 2.4Ghz band. Best of lucks.
-
AlanBrownSugar88 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 motion detection zones not working I've spent hours today tinkering with it and researching and I'm still in the same boat. They have been rolling a new firmware out for the C210 since about September and I've still not been offered it, how long does it take to update everybody? Even then that's hoping they have even fixed it in the update. Really frustrating getting notifications just to see me neighbour is having food delivered way outside my detection zones.
-
secon25 🇬🇧
2 commentaires analysés
r/homesecurity · Recommendations for an affordable camera with an app that notifies if it goes offline? The app on the phone knows when the camera goes offline. If you open it and camera is offline, it says that it is offline
r/homesecurity · Recommendations for an affordable camera with an app that notifies if it goes offline? >If the camera loses connection it's more than likely that the internet connection is down so notification wouldn't work so well. But if I open the app, it shows that the camera is offline. It would be cool if the app would check in background if the camera goes offline
-
Blind_Voyeur 🇬🇧
1 commentaire analysé
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. In the app under 'Device Info' when you click on the top right 'hex' icon when you view camera.
-
ZurdoMiranda57 🇬🇧
1 commentaire analysé
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. I’m having the same problem. Good to know that it’s still in the roll out phase. Thanks!
-
Big_Drink_6551 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues I don't know if anyone still has this issue, but I sorted it by disabling "loop recording"!
-
Lonewarriorr 🇬🇧
3 commentaires analysés
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. Hey, I actually I found a clarification on this issue from the Tapo support themselves. What they're saying is "Firmware v1.4.3 has not yet been fully released to all Tapo C210, so it is normal to see some of your Tapo C210 have v1.3.11. It is recommended to wait patiently for the new firmware to be available for your camera." They also said this if you insist for force update for any reason. "If you want to use the new firmware of the Tapo C210 V2, we can provide a beta firmware, and please send me(@Solla-topee) "Forum ID 699376+Tapo C210's MAC address" via a private message to obtain the beta firmware. Typically, it's recommended to wait patiently for the new official firmware to be released to your camera" Forum link :https://community.tp-link.com/en/smart-home/forum/topic/699376
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. Strange! I'm also facing the same issue and now I don't see the options of FPS in 1.3.11 version whereas in 1.4.3 I get with one of the 2K camera...
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. Strange! I'm also facing the same issue...
-
merlin867 🇬🇧
3 commentaires analysés
r/Tapo · Tapo Camera Geofencing / recommended settings Yes, all of this!! It's a bug with software and/or my my phone.
r/Tapo · Tapo Camera Geofencing / recommended settings I'm on android, I've tested with all setting and camera never come online. I must do it myself. Same thing when I come back...
r/Tapo · Tapo Camera Geofencing / recommended settings You're lucky, mine never start!!! It's a useless feature for me. I'm still waiting for bugfix
-
M_Six2001 🇬🇧
2 commentaires analysés
r/Tapo · Does the C120 have a screw hole on the base? The C210 mount would work for most uses. But it still allows anyone to twist the camera off the mount and walk away with it. Although if it comes down to that, the camera itself can be twisted off the support arm easily, so I suppose it's a moot point. Don't get me wrong, I like the C120. I have 3 in use now. And I understand that for $25, you're not going to get a robust camera housing and mount.
r/TpLink · TAPO wifi home camera ( c210 ) There's a calendar that shows all the days there are recorded video. Just go to the day you want to watch.
-
Inverse_Indicator 🇬🇧
1 commentaire analysé
r/Tapo · Where are my Tapo C210 recordings / pictures being stored? I don't have SD card installed nor do I subscribe to Tapo Care. Super weird...logged out, deleted the app, signed back in. The pictures are still in the "download" section! Confirmed I deleted the copies out of my camera roll and emptied the trash.
-
AzoXtra14 🇬🇧
1 commentaire analysé
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. I have the exact same issue, only one C210 Is on version 1.4.2 and the rest of them are on 1.3.11 even one of my camera's I brought recently a C211.
-
matrixunloaded 🇬🇧
1 commentaire analysé
r/TpLink · My c210 wont connect to my 2.4g wifi, but before it did I have done all the above including deleting and reinstalling the TAPO app. Nothing will connect C210 as an additional camera after adding the first camera which was a C200.
-
Tremulant1 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 Local Playback Problems You could be right. It could also just be the camera, I’m not sure. I recently purchased another C210 and it plays back locally even with privacy mode off. Strange.
-
Affectionate-Use-252 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 Local Playback Problems Didn't work for me even after turning off privacy mode. It seems like an artificially created bug in Tapo app to force customers pay for their cloud storage service. The codes are saying that over mobile data the videos were loaded but just blocked by Tapo app from playing it.
-
V2UgYXJlIG5vdCBJ 🇬🇧
1 commentaire analysé
r/TpLink · TAPO wifi home camera ( c210 ) Yes you can use the app to watch recorded video.
-
Rough-Rope-6274 🇬🇧
1 commentaire analysé
r/TpLink · How to set the tapo app to sound when motion is detected? You have to use the phone system notification sound. The mice and chipmunks send me "text messages" all the time. It detects motion but the brain dead Tapo app programmers seem to think nothing else triggers the camera, OR that their customers actually never use other apps that notify. It's the dumbing down of education by the global elites.
-
endpoint101 🇬🇧
2 commentaires analysés
r/Tapo · Tapo C200 or C210? Don't buy purely on the resolution difference; in the tests I've done with the TC70 **1080p** and C220 **2K** cameras there's negligible difference in the detail that gets recorded. It seems to be due to the low bitrate of the H264 stream; there's a video about it here; [https://youtu.be/3Vx7y3aA6uE](https://youtu.be/3Vx7y3aA6uE) I presume it'll be a similar situation with the C200 and C210. There's a discussion about it here on the Tapo forums re. the C100 and C110; [https://community.tp-link.com/en/smart-home/forum/topic/701490](https://community.tp-link.com/en/smart-home/forum/topic/701490)
r/Tapo · Tapo C125 or Tapo C200/210? When I compared the resolution between the 1080p TC70, and the C210 I found the difference in the recording to be minimal. Admittedly this isn't comparing the C200 to C210, but it looks to me that the bitrate has a big effect on the resolution and 2K doesn't end up being a big plus. I compared the two in this video; [https://www.youtube.com/watch?v=3Vx7y3aA6uE](https://www.youtube.com/watch?v=3Vx7y3aA6uE)
-
Catalina28TO 🇬🇧
1 commentaire analysé
r/homeassistant · Do Tapo cameras still work with ONVIF integration? Not sure if this was it but I will post my resolution here. I changed the camera name to be different from my cloud account name, did not make the camera username an email address and now the camera stream shows up in home assistant.
-
AkBrPoz 🇬🇧
1 commentaire analysé
r/TpLink · Continuous recording is only detection recording Hello, I just bought this C210. I made all ( SD card, format, set blue continuos recording, no motion , reboot camera) and not work. Can you help ? Thank you
-
stockys7 🇬🇧
1 commentaire analysé
r/TpLink · One Camera Not Updating Firmware Update 1.4.2 was initially released for Tapo cameras within a subrange of MAC address, that's why some cameras update and others don't.
-
aroedl 🇬🇧
1 commentaire analysé
r/TpLink · Tapo android app home screen shortcuts Check out all the quite awesome widgets the Tapo app offers. I don't know what phone you have but on mine it's a long-press on the home screen to access the widgets.
-
KokakGamer 🇬🇧
1 commentaire analysé
r/TpLink · Setting Up TP Link C210 Through the Tapo app I assume they're functionally similar to my C120 so: You need to pair them first to your account and use internet to do it, BUT afterwards you can view them without internet access IF you use their RTSP mode. Once you setup their RTSP mode, they can be viewed by any local RTSP viewer on the same network. Doesn't matter if the network has internet access or not. But that said, without internet access you can't watch these cameras when you're away from your local network. If that's fine with you then it works out. My setup though has the router connected to internet. My cameras are online but run RTSP mode also. I don't port forward my RTSP ports so that you can't remotely view them through RTSP (for security reasons). When I'm away, I view them using the Tapo app. Locally, I view them through RTSP viewers.
-
juan186 🇬🇧
1 commentaire analysé
r/TpLink · Seeking a indoor camera with ONVIF and RTSP I update the thread. I’ve bought the camera and I’ve archived to configure ports in my router in order to allow the connection from rtsp and onvif. However, I can’t accomplish to disable all the cloud features of tapo. Maybe the only way to do it is configuring the firewall of my router to allow connections only to the specific ports that aim to the camera that I had opened formerly?
-
garvonodi 🇬🇧
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues Same issue here with a recently bought c210 camera. I use a 64gb Amazon basics sd card. Mailed tplink several hours ago. No reply yet
-
mpd94 🇬🇧
1 commentaire analysé
r/TpLink · Tapo app shortcuts I wanted to activate a shortcut via API/Google Home/Alexa but it's not possible. Really annoyed since I can't control my cameras as currently the pytapo python library is not able to connect due to the changes they implemented.
-
telcoman 🇬🇧
1 commentaire analysé
r/TpLink · My c210 wont connect to my 2.4g wifi, but before it did For posterity. I had the same issue. Resetting and reconnecting did not help. Updated the TAPO app and everything worked out - I connected the camera and it is working now.
-
StatisticianNeat6778 🇬🇧
1 commentaire analysé
r/TpLink · Seeking a indoor camera with ONVIF and RTSP You can use the mobile app TinyCam to record RTSP streams, a NAS from Synology, or a computer running Windows with Frigate or BlueIris software.
-
Responsible-Ad-1086 🇬🇧
1 commentaire analysé
r/homeassistant · Tapo camera asking for authentication every day https://preview.redd.it/ynd13mh9tkdh1.jpeg?width=1170&format=pjpg&auto=webp&s=f3703b1f9153b6833116ecaab26568990ec911bb This one. Have turned the camera on and off to see if it fixes it
-
TrickCartoonist7454 🇪🇸
1 commentaire analysé
r/Tapo · simplest way to switch from home/away mode? Cuesta mucho entender lo que quisiste poner, pero después de un año de esperar a que la app ponga esa opción mucho más simplificada, (algo tan sencillo como darte la opción de activar "fuera de casa" como un atajo), pude hacerlo como lo explicaste
-
Many_Big_9260 🇹🇷
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Takip birtek bende vardı fakat kendi kendine dönüp durmaya başladı nedeni anlayamadım
-
yanksfold 🌐
2 commentaires analysés
r/Tapo · Tapo C210 false person detection alerts Same issue. Annoying
r/Tapo · Tapo C210 false person detection alerts Same issue w 210!!
-
SnooRobots4017 🌐
1 commentaire analysé
r/TpLink · Tapo C210 moving on its own Mine has just done this to me tonight feels odd
-
Dry-Yak-3096 🇩🇪
1 commentaire analysé
r/TpLink · Tapo C210 camera can't be accessed through VPN Bei mir ist das gleiche Problem. HideNat nach dem Tunnel funktioniert auch nicht. Die Lösung mit HA im Container ist insofern nicht zufriedenstellend, weil so nicht alle Features der Kamera nutzbar sind. Vielleicht funktioniert das Ganze mit DNS-Override. Ich werde es testen und meine Erfahrungen hier teilen.
-
Imaginary-City789 🇪🇸
1 commentaire analysé
r/TpLink · Tapo C210 micro sd card issues No funciona :( creo q es un problema general. Demas que lo que buscan es el pago de almacenamiento en nube.
-
Individual-Army-4772 🌐
1 commentaire analysé
r/TpLink · Only 1 of 3 C210 Tapo cameras receiving firmware updates. I have the same problem
Aucun avis pour ce filtre.
Souvent comparé à
Questions fréquentes
La Tapo C210 fonctionne-t-elle sans abonnement ?
Oui, les utilisateurs Reddit indiquent que les fonctions courantes et la lecture des enregistrements sur microSD restent disponibles sans Tapo Care. Le flux RTSP permet également l’enregistrement sur certains NAS ou logiciels compatibles, bien que la configuration initiale passe par l’écosystème Tapo.
La qualité d’image 2K est-elle vraiment meilleure ?
Le consensus Reddit est partagé. L’image de jour et le zoom sont souvent jugés bons, mais certains utilisateurs trouvent le gain limité face au 1080p, notamment à cause du débit vidéo, des artefacts en mouvement et d’une qualité plus faible en basse lumière.
La détection de personnes est-elle fiable ?
Les retours sont très variables, avec une majorité de critiques sur les fausses alertes causées par les ombres, la lumière ou la végétation. Des événements peuvent aussi être manqués, surtout dans l’obscurité, même si quelques utilisateurs trouvent la détection de personnes satisfaisante en intérieur bien éclairé.
La Tapo C210 est-elle facile à installer ?
Les utilisateurs Reddit la configurent généralement avec l’application, sans concentrateur obligatoire. Elle exige toutefois un réseau Wi-Fi 2,4 GHz compatible, et certains signalent des difficultés avec le WPA3, les réseaux maillés, l’ajout de plusieurs caméras ou certaines cartes microSD.
Je l'ai activée en trouvant la possibilité mais ça n'avait pas l'air de changer grand chose. Maintenant j'ai essayé un truc hier soir en activant "emplacement amélioré" dans le geofencing. Ça a marché aujourd'hui, mais j'attends de voir si ça marche à chaque fois. Il me semble l'avoir activé déjà une fois mais ça n'avait rien changé.
En ayant activé l'autorisation d'activité en arrière plan l'automatisme s'est mis en route en sortant de chez moi. Par contre l'icône de localisation reste constamment allumée, à voir si ça n'affecte pas la batterie. https://preview.redd.it/bad6ikr5dxte1.png?width=1080&format=png&auto=webp&s=a8cbbfb2c504a682c04e4518dd69b8e97e6e952c
J'ai tenté de désinstaller et réinstaller l'appli Ça m'a remis mes configurations et une nouvelle arrivée/départ. Comme les deux étaient actives ce matin ça n'a pas réagi, j'ai désactivé mes configurations pour tester si celles proposées fonctionnent quand je rentre chez moi.
Ça marché deux jours et aujourd'hui ça ne marche plus..
Bon, apparemment ce réglage à l'air de fonctionner. L'allumage et l'extinction des caméras se fait sans action de ma part depuis hier. À voir dans le temps si ça fonctionne toujours ainsi.
I deleted all the automations and redid them. Apparently it seems to work, we'll see over the next few days. But it's annoying to have to redo everything.
Nope.. I must activate every morning when I go to work and deactivate when I'm home and see the green light on.
I installed the IFTTT app but I couldn't add the activation/deactivation command for the cameras 🤔 I have a Google camera for the hallway and I have no problem with that one and it works with 5G when I leave and come home, I don't understand the madness.
It's enabled, but not working. I don't understand why