Meilleur du Meilleur

Reolink Elite Floodlight WiFi

Reolink Elite Floodlight WiFi, packshot

Idéal pour : Idéale pour remplacer un projecteur extérieur câblé et surveiller une zone large sans dépendre du cloud.

En bref : Les utilisateurs Reddit apprécient la couverture large, l’enregistrement local et une installation adaptée au remplacement d’un projecteur existant. Le consensus reste toutefois mitigé en raison d’une détection lumineuse parfois tardive, de logiciels inégaux selon le micrologiciel et d’un prix jugé élevé.

Note de consensus

3.9/10

#21 sur 26 · Caméras de surveillance

selon Reddit

Score de sentiment26 % positifs
Positifs36
Neutres26
Négatifs76

Au-delà de ce modèle, la marque Reolink (toutes gammes) recueille 34 % d'avis positifs sur 886 utilisateurs Reddit. Ce signal marque ne compte pas dans la note du modèle ci-dessus.

Voir sur Amazon

Points forts

Utilisable sans abonnement

8 0

« Are people really not willing to put in an extra 10 seconds of configuration for significantly increased privacy? » Voir l’avis

« You'd still be able to get the mobile app or desktop client elsewhere. » Voir l’avis

« I don't believe the mobile app requires any internet connection in the generation of the QR code or subsequent camera set up. » Voir l’avis

Points faibles

Application perfectible

4 18

« Unfortunately, I think HTTP/HTTPS are default off when you take it out of the box and I think ONVIF is off too. » Voir l’avis

« I know this should have been easy and a basic feature in the firmware itself. » Voir l’avis

« You have to update manually, either via the PC client or the web UI. » Voir l’avis

Qualité d’image perfectible

3 10

« So between the XPro and the Floodlight, I think it comes down to whether you'd rather have more of a deterrent (Floodlight) or if you'd rather have a better night image (XPro). » Voir l’avis

« I think I agree with everything you posted, particularly the vertical FOV, the Duo 2 is near perfect the "newer" Duo 3, Duo 2V, and Elite do not have sufficient vertical FOV. » Voir l’avis

« The reliability and the fact that you can stream the highest quality video makes it worthwhile. » Voir l’avis

Fiabilité à surveiller

12 27

« It's way too easy to knock WiFi devices off a network. » Voir l’avis

« Of course you won't have firmware update anymore, and sooner or later, the webcam will become a trash. » Voir l’avis

« Does it work with ONVIF and has an open API? » Voir l’avis

Prix élevé

1 2

« I wasted money returning two Reolinks before they let me know it could be the USB. » Voir l’avis

« Is the high current price due to tariffs factored in? » Voir l’avis

Installation contraignante

14 20

« Hopefully, I wish someone made more floodlights that where PoE (even if just a light, no camera). » Voir l’avis

« You have screwed the mounting in the hole through which the wires are coming out!! » Voir l’avis

« One hot wire looks damaged and may be arcing to ground. » Voir l’avis

CritèreNote /10Ce qu'en dit le consensus
Application1.7Les réglages sont complets, mais leur disponibilité et leur emplacement varient selon le micrologiciel, le Hub ou le mode autonome.
Fiabilité2.2Les expériences vont d’un Wi-Fi stable à des déconnexions, problèmes de reconnexion et micrologiciels mal référencés.
Image1.7La couverture horizontale et le rendu nocturne plaisent, mais le champ vertical, le grain et le flou en mouvement divisent.
Prix2.3La majorité des avis cités trouve le tarif élevé face aux autres caméras Reolink ou Ring.
Détection2.9La détection est configurable, mais l’allumage nocturne peut rester lent ou perturbé par la lumière ambiante malgré les correctifs.
Installation2.9Le remplacement d’un projecteur secteur est pratique, mais la configuration USB-C et l’absence d’Ethernet peuvent compliquer le démarrage.
Utilisation sans abonnement6.9Les utilisateurs confirment l’enregistrement et l’accès local sans abonnement ni connexion Internet obligatoire.
Mis à jour le Comment on calcule

Avis Reddit

140 avis analysés · Positifs 36 Neutres 26 Négatifs 76 · 98 auteurs affichés

  • PITCHFORKEORIUM 🇬🇧

    1 commentaire analysé

  • thehighquark 🇬🇧

    1 commentaire analysé

  • stephensmwong 🇬🇧

    1 commentaire analysé

    r/reolinkcam · If The Company Went Dark

    You should be able to use the HTTP/HTTPS interface, and you can also use 3rd video recorder, like Surveillance Station App in Synology DSM to record the webcam. Of course you won't have firmware update anymore, and sooner or later, the webcam will become a trash.

  • mblaser 🇬🇧🌐

    28 commentaires analysés

    r/reolinkcam · Battle of these 3 cameras for front of house camera: Elite XPro POE (with wall sconces) vs. Elite Pro Floodlight POE vs. RP-PCT16MD

    Ooh I love these kind of posts. Hang on, let me get up on the pulpit lol... First thing I'll say is I can't speak much on the Pro camera since I haven't used one, but everything you said about it should be accurate. Second thing is... be aware of is the availability of the XPro. If you're in the US it's hard to say when it's going to be available. It was originally supposed to be October, then I was told *maybe* January. The maybe in there didn't instill confidence in me though. So who knows. I've had a test unit since April, so I'm not sure what the hold up is, but I can tell you it's a great camera. At least for me, because I have some ambient light in the form of a front door light and a few neighbors with the same. However, what's great about the XPro is that it's both IR **and** ColorX. It's the best of both worlds. So even if you don't have much lighting you still have the IR mode to fall back on. And it's much better IR than a non-CX camera because the 1/1.8" CX sensor helps with capturing more light even in IR mode. For example look at this comparison between the IR modes of the Duo 3 and the XPro: [https://i.vgy.me/6yAKfp.png](https://i.vgy.me/6yAKfp.png) Look at how much better the XPro's IR looks. And you're right about the XPro's spotlights, I think they made them so weak because the camera doesn't need a lot of light. Here's a recent example of mine switching from IR to color when its spotlight comes on: [https://www.youtube.com/watch?v=sTcPz5vOckM](https://www.youtube.com/watch?v=sTcPz5vOckM) Plenty of lighting from the spotlights. Again though, I have a front door light. It also might not be much of a deterrent. When I walk outside at night I often don't even notice that the XPro's spotlights came on. So the Floodlight model would definitely be more of a deterrent. In my case I use HomeAssistant to help me out there. When any of my front cameras detect a person then my front door light, which is smart, goes from the normal 30% brightness to 100% and some of my indoor smart lights come on as well. So I think I have the deterrent aspect nailed down. The only thing that I've been disappointed in with the XPro is that the image clarity isn't as good as it should be for a 16MP camera (technically an 8MP x2 camera). But even for an 8MP camera it's a bit disappointing, and I'll show you why... As an experiment I set my trash can in my driveway about 30ft away and had 4 different cameras set up. I digitally zoomed in on the lettering on the trash can on all 4 of them to compare the image clarity. See here: [https://i.vgy.me/xOMUiS.jpg](https://i.vgy.me/xOMUiS.jpg) Look at the phone number. Oof. The XPro and the Duo 3 weren't much better than the 4MP CX410, and the 8MP CX810 was clearly much better than all of them. Theoretically the Duo 3 and XPro should be about the same as the CX810. Now like I said, this was a test unit I've had since April. It wouldn't surprise me if it's taking so long to come out because they're making changes to it. In fact, when I showed Reolink that 4-way comparison they seemed surprised and wanted me to send them all my original photos. So maybe that prompted some changes and the final release will be different. So between the XPro and the Floodlight, I think it comes down to whether you'd rather have more of a deterrent (Floodlight) or if you'd rather have a better night image (XPro). By the way, I do have the wifi version of the Elite Floodlight. I have it mounted in a different area and mounting position, so it's not a 1:1 comparison, but you can see some examples in my review of it here: [https://www.reddit.com/r/reolinkcam/comments/1miildh/elite\_floodlight\_wifi\_review/](https://www.reddit.com/r/reolinkcam/comments/1miildh/elite_floodlight_wifi_review/) In fact, in the examples in that review the camera that's overlooking my driveway is the XPro. I didn't name it in the review because I was under an NDA at the time, which expired in October. Anyway, thanks for coming to my TED talk.

    r/reolinkcam · No ethernet port for the new Reolink Elite Floodlight WiFi ?

    Looks like there's going to be a POE version: [https://www.reddit.com/r/reolinkcam/comments/1o25bkc/new\_nvr\_firmware\_adds\_features\_for\_elite\_pro/](https://www.reddit.com/r/reolinkcam/comments/1o25bkc/new_nvr_firmware_adds_features_for_elite_pro/) The wifi one is geared towards people that are wanting to replaced an old "dumb" floodlight. Which means they'd already have what they need at the location as far as wiring goes. They're also likely people that don't want to run ethernet, and probably don't even know what ethernet is lol. Not to mention that you shouldn't be running ethernet into the same junction box as 120v.

    r/reolinkcam · If The Company Went Dark

    You'd still be able to get the mobile app or desktop client elsewhere. They wouldn't disappear if Reolink went away. I'm not sure if the mobile app would still work without their servers, but I'm pretty sure the desktop client would. Beyond that, it would be difficult because like you said HTTPS is off by default. StarkillerTR shared a way you might be able to do it with a Python script here: https://www.reddit.com/r/reolinkcam/s/puB0kmdyY2 That's a perfect example of why I don't think we'd be screwed if Reolink disappeared. There are a lot of very smart people in the community that can figure out things like that.

    r/reolinkcam · If The Company Went Dark

    Hmm I just realized which camera you were talking about. The fact that it doesn't have an ethernet port is a big difference. It might be impossible to do in that case. Having an ethernet port opens up many possibilities, but without one I don't know how you would get it connected to your wi-fi. You need UID to start that process and UID relies on their servers. Although maybe in this case it doesn't actually reach out to their servers during setup. Who knows, the only way to know for sure would be to test setting one up without internet.

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    The red lights aren't error lights, those are 100% the IR lights. After seeing your image below I guarantee that's the case. You said the IR lights are invisible, that's not true. I think what's happening is the floodlights are coming on and lighting up the area *so much* that the camera now thinks it's day (having so many nearby white colored objects isn't helping). So since it thinks it's day it turns the floodlights off. Well now it sees that it's night, so it turns them back on. Now it's in a loop. The way to test if this is the case is to temporarily set day and night mode to black and white (i.e. night mode). In the mobile app that's under settings>display>day and night. And if that does turn out to be the issue then you need to either keep the brightness lowered, or you can play around with the auto-switch threshold slider. Settings>display>advanced>threshold. That will maybe allow the light to be brighter before it switches

    r/reolinkcam · Floodlight setting

    I just checked my NVR with my wifi Elite Floodlight and I have the proper settings. I also have them in my mobile app. Have you tried via the mobile app or desktop client? What model, hardware version, and current firmware is your NVR?

    r/reolinkcam · Duo vs Elite floodlight help

    Mine is the wifi version that's hardwired to AC 120v for power, so not only does it have much less cabling to hide, it has to go onto a junction box anyways. I haven't seen the poe version in person, but if it's like the rest of their cameras you're not meant to hide the cables in the camera base, it should all go into a junction box or into the wall it's mounted to.

    r/reolinkcam · Elite Floodlight WiFi Review

    >despite them teasing to several times What did they tease exactly? You lost me there. >Many have decided to go for other products elsewhere because of it. And many more *new* customers will come to Reolink because this floodlight is such an easy install for people wanting to upgrade their non-smart floodlights. Hey, I always want POE as well, but focusing on hardwired wifi first is a smart business decision because it's a large market and it's a relatively untapped market. POE users like us are a minority. It's the same reason they also focus on battery cameras a lot. A Reolink employee once said the percentage of cameras they sell that are battery cameras, and I forget the exact percentage, but it was the vast majority of their sales. The average consumer wants an easy install, not to have to run ethernet. Convenience always trumps quality when it comes to the average joe.

    r/reolinkcam · Elite Floodlight WiFi Review

    Yeah, it would be interesting to see how much power this thing draws. I wish I had thought of that before I mounted it, I could have powered it with that cable it came with and checked it with my power draw meter. Too late now, I'm not disconnecting this thing, it was kind of a precarious install lol.

    r/reolinkcam · Elite Floodlight WiFi Review

    It's not as big of a difference as it sounds. The regular price of the Duo Floodlight is $170. $220 is the regular price of this one, so $50 difference, but right now in the US it's up for preorder for $198. I expect that once it's fully released that it will probably sell for around $170-180 when on sale, which like all the rest of their cameras, is almost all the time. If I were shopping for one and choosing between the 2 and the difference was $50, it'd be well worth it to me. For all the reasons I listed in the pros section of my review. If I already had the Duo like you do? Yeah, maybe not. Ring? Yeah, I don't care what its cost is. Even if it were free I wouldn't take it. Not to mention that the one I think you're talking about is 1080p, not a dual lens, and only 2.4ghz wifi4. So... 10 year old tech. Not quite a valid comparison. It's kind of insulting that they charge $100 for it actually lol. It should be like $50.

    r/reolinkcam · Am I screwed? Painted new Reolink Elite Floodlight WiFi and don't have QR code or UID.

    Unfortunately that's one of the few wifi cameras of theirs that doesn't also have an ethernet port on it. If it did you'd just be able to plug it into your network to get it set up. However, that cam doesn't have that, and I can't think of any way to do it without the QR code or UID. I don't think I've ever seen the QR code be on an insert in the box, as the 1st commenter said, and I've opened at least 50 boxes of theirs lol. Even ignoring the QR/UID mistake, you should have set it up before having it painted. If there were something wrong with it and you had to send it back they're not going to take a return back now that you've painted it. Not to mention voiding the 2 year warranty.

    r/reolinkcam · 24/7 NVR recording over Wi-Fi Wired Camera?

    It depends entirely on your wifi setup and signal strength. I currently have 16 cameras capable of recording 24/7. 5 of them are doing so over wifi, including that Elite Floodlight, and I have zero issues. I have a pretty beefy wifi setup though, all Omada gear with 4 APs around my house that are all wired backhaul to my main network switch. Mine are all close enough to be able to do it over 5Ghz, so I can't vouch for how they'll perform over 2.4Ghz. It sounds like you might want to upgrade your wifi for better coverage though.

    r/reolinkcam · Elite Floodlight WiFi Review

    I never really tested this because I have an outdoor AP located about 8ft away from the camera, so it's always at 100% signal. I did test it just now though. I unplugged that AP and let the camera connect to the next closest AP, which is about 30ft away and through 3 walls. It connected at 54% signal strength according to my network controller. That was still good enough for 2 high quality streams (1 back to NVR and 1 of me live viewing) with no issues . So it seems to have pretty good range.

    r/reolinkcam · Elite Floodlight WiFi Review

    I didn't run it, but yes that's what it is, flexible conduit. That is attached to a sunroom we had built last year, and as part of the inspection the city required a light at that corner, so my contractor's electricians installed that junction box and ran the wiring through that conduit and put a dumb floodlight on the junction box to satisfy the inspector and pass inspection. It was great timing because less than a month later Reolink came out with this camera so I just swapped it in there.

    r/reolinkcam · Elite Floodlight WiFi

    Yeah, the update button rarely works. You have to update manually, either via the PC client or the web UI. So if you can't use a PC you could technically do it in a browser on a mobile device. [https://support.reolink.com/hc/en-us/articles/34817575507481-How-to-Manually-Update-Firmware-for-Reolink-Devices/](https://support.reolink.com/hc/en-us/articles/34817575507481-How-to-Manually-Update-Firmware-for-Reolink-Devices/)

    r/reolinkcam · Elite Floodlight WIFI

    Yeah, that camera uses their newer "advanced sharing" feature instead of simple user accounts. [https://support.reolink.com/hc/en-us/articles/360006916814-How-to-Share-Your-Device-with-Others/](https://support.reolink.com/hc/en-us/articles/360006916814-How-to-Share-Your-Device-with-Others/) I agree, even as someone that doesn't have a need for separate users, it's a downgrade.

    r/reolinkcam · Duo vs Elite floodlight help

    I haven't noticed any issues with the stitching. You can see some sample videos from my Elite in the [review](https://www.reddit.com/r/reolinkcam/comments/1miildh/elite_floodlight_wifi_review/) I did. And even if I did notice any stitching issues, that's very low on my list of things that would cause me to not like a camera. It's not going to affect being able to identify someone or anything like that, so I wouldn't really care if the stitching is bad.

    r/reolinkcam · Elite Floodlight WiFi Review

    Well, detection shouldn't be an issue, but viewing angle will be due to the vertical field of view. In my examples above it's at 10ft high, so yours will be like mine.... you have to choose whether you want to see farther out away from the building, but not close to the building... or vice-versa.

    r/reolinkcam · Elite Floodlight WiFi Review

    Yeah, you can have it only turn on at night when the cam detects a specific smart motion type, which is how I think almost everyone will use it. Or you can do it by a schedule... have it always on during specific hours. There's also an auto mode where it will always be on at night, but it will auto adjust the brightness based on how dark it is. I haven't really played with that setting though.

    r/reolinkcam · Elite Floodlight WiFi Review

    Well, it all depends on the area it's watching and the height you have it at. If the camera's not very high then the vertical FOV isn't an issue. Or if you're like me and have it up high, but pointed down then it's not an issue either. I'm happy with it for my situation. However, if I were wanting to watch a large area and not have a blind spot underneath the camera unless it's mounted only 7ft high.... yep, it sucks for that, and that's why I'm going to keep criticizing them about it.

    r/reolinkcam · Elite Floodlight WiFi Review

    I talked about that in #3 under the Pros section of the review. Because it's not POE, many more *will* buy it. The average consumer doesn't know how to run ethernet and doesn't want to run ethernet to a mounting spot where they already have electrical wiring for their old non-smart floodlight. The average consumer doesn't even know what POE is. That's who is going to buy a lot of these.

    r/reolink · Reolink Elite Floodlight WiFi (Hardwired) - pink video

    >better control over the auto-light feature (only for humans for example) It should have that, it has smart controls so it only turns on for people, vehicle, pets, etc, but it might depend on what firmware yours is on and if your mobile app is up to date (4.55). I didn't realize where the menu was at first because it's not intuitive, but this is what they told me... [https://imgur.com/a/gXTYf4D](https://imgur.com/a/gXTYf4D) The camera isn't even supposed to be out for another month (I think some regions screwed up by selling it early), so I don't think they're completely done with the UI for it.

    Détection IA
    r/reolink · Reolink Elite Floodlight WiFi (Hardwired) - pink video

    Yeah, they really should have a disclaimer on it about this because I feel a lot of people aren't going to want to waste the time mounting it if they think it's a bad camera. Mine was actually pink on both lenses so I was afraid it was bad. But then I also noticed that a lot of the settings were missing so I had a hunch it had something to do with how it was being powered. So I temporarily powered it with the bare wire power cord thingy it came with and then everything was normal. Speaking of that... did yours come with that bare wire extension cord? This thing? [https://i.imgur.com/T5PZFxn.png](https://i.imgur.com/T5PZFxn.png) Mine came with that, but it was outside the camera box. And it's not listed on the product page under "What's in the box", so I'm wondering if they're actually including that with all units, or it was just my test unit.

    Extérieur
  • TheDeltaFlight 🇬🇧

    2 commentaires analysés

  • crocodilius29 🇬🇧

    1 commentaire analysé

  • ElectroSpore 🇬🇧

    9 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi Review

    I think I agree with everything you posted, particularly the vertical FOV, the Duo 2 is near perfect the "newer" Duo 3, Duo 2V, and Elite do not have sufficient vertical FOV. This is particularly evident if you have it mounted pointing down a little to try and catch people directly below it it will cut them off at the top. The Duo 2 is MUCH better in this regard FOV wise. I also noticed the detection delay you can actually see the camera has detected you as the IR sensors change but the lights take SEVERAL seconds to come on, most of the time if I am approaching from around the corner I am almost at the light before they come on. I am still really Happy with them however, I have two and the style, install, and general features are great. One additional one for me is that fact it is a WPA3 / WiFI 6 device that works with DFS channels.. One of the reasons I have avoided past WiFi Reolinks is the "WiFi5 dual mode" cameras could not connect to WPA3 or DFS.. Now I just need them to release a wifi 6 doorbell.

    r/reolinkcam · Elite Floodlight WiFi

    In Close mode (off unless there is motion detected) according to support the threshold setting does nothing and it doesn't come on at dusk at all until it is fully night / dark. Been trying to tell almost all cheap motion floodlights let you set the light threshold. I would report your issue in a ticket and see what they say.

    r/reolinkcam · Hardware - IPC_NT18NA68MPW - newest Elite Floodlight wifi

    Given how far the flood light provides light I would expect detection to be WAY more sensitive and quick than it is. Even on NT15 hardware with the latest update the difference is something like 1s delay instead of 2s, which is still enough time to walk almost complete under it if it is on the side of a building and you are at the far edges of its FOV.

    r/reolinkcam · Elite Floodlight WiFi Question - Light control

    I just had to fiddle with this for a different reason around "when it thinks it is dark" 1. Set a schedule for scheduled mode with the widest possible times you want it on. 2. Now flip it to off/close mode when you want it off and scheduled when you want it on.

  • basement-thug 🇬🇧

    1 commentaire analysé

  • Jos_Jen 🇬🇧

    1 commentaire analysé

  • MarvinStolehouse 🇬🇧

    1 commentaire analysé

  • IndispensableDestiny 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink Elite Floodlight WiFi tripping circuit breaker

    One hot wire looks damaged and may be arcing to ground. Stuff your wires in the j-box before screwing on the mounting plate. Have the wire nuts pointing up. Hats not cups (that can hold water). Make sure you have a solid ground under that wire nut and behind the green screw. Clean the old wires. Like another said, hook up your Reolink to another circuit that is on a CAFCI, even with just a plug to receptacle.

  • BladeRunner26 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    yep annoying isn't it? when mine turns off the light, the motion sensor kicks in and my automation turns it immediately back on again. I've also had to introduce a delay too. also the motion sensor cannot be fully deactivated on this camera it seems!

  • Kirbieb 🇬🇧

    1 commentaire analysé

  • ThunderboltsRock 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi

    This resolved my issue where it was not changing to night mode and therefore not triggering floodlights: Please adjust the black & white color threshold to -26. If the issue persists, try adjusting it further to -45 and see if it helps. https://support.reolink.com/hc/en-us/articles/14608263489945-Black-and-White-Color-Mode-Switching-Threshold-Guide/

  • ToMorrowsEnd 🇬🇧

    1 commentaire analysé

  • No-Cantaloupe2149 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    So should I finally replace my Ring Floodlight Pro with this? All other cameras I have are Reolink and on my NVR. Ive been waiting for a duo cx for years at this point, but this seems like a decent option.

  • ian1283 🇬🇧

    6 commentaires analysés

    r/reolinkcam · If The Company Went Dark

    An NVR would not help with a wifi camera as there is the chicken & egg problem. Until the camera is connected to a wifi access point the nvr cannot access the camera. The desktop client is available on a number of non-Reolink sites such as this reddit sub, likewise the mobile client can be retrieved from sites such as APKMIRROR for the android version. I don't believe the mobile app requires any internet connection in the generation of the QR code or subsequent camera set up. But it would be an interesting exercise to verify on a network without internet access to see whats possible.

    r/reolinkcam · Help with Initial Setup

    Your first stage should be to add the cameras & doorbell to your Reolink app as standalone devices. If not already done I'd recommend installing a sdcard which can be used as a secondary recording location, a 32/64GB card is suitable for this. As for the process its better to complete as much of the initial setup of the devices on the kitchen table, its far easier to perform any reset/configuration/etc when everything is side by side. In the case of the doorbell plug an ethernet for the setup as that avoids the requirement to scan any qrcode, once the doorbell is on your network using the Reolink app add the wifi parameters. Then fit the cameras in their desired locations and verify all remains ok whilst using your eero network. The cameras work equally well (if not better) on your home network especially as you have mesh wifi. Now add the cameras to the nvr but leave them on your eero network. Note this requires use of a monitor/mouse - this step cannot be done via the apps. [https://support.reolink.com/hc/en-us/articles/900004614403-How-to-Add-Reolink-Cameras-to-Reolink-NVR-New-UI/](https://support.reolink.com/hc/en-us/articles/900004614403-How-to-Add-Reolink-Cameras-to-Reolink-NVR-New-UI/) Unfortunately there is no option to disable the onboard wifi on the nvr, best approach is don't connect the antenna to the nvr.

    r/reolinkcam · AI questions

    [https://support.reolink.com/articles/44949969778713-Introduction-to-Reolink-AI-Video-Search/](https://support.reolink.com/articles/44949969778713-Introduction-to-Reolink-AI-Video-Search/) Based on this it is supported for cameras running standalone or connected via selected NVR models and not an option using a homehub.

    r/reolinkcam · Help with Initial Setup

    Was it just one of Elite floodlights that you had a problem with and the other two were fine? It was not clear from your post. Sometimes the initial setup can be a little confusing, that why its good to do this inside as it makes it much easier. I suspect with the Elite wifi you will need to temporarily connect the power connections for the initial setup, so if you have some terminal blocks to wire in the cables that should work ok although do note there will be 110-230V mains voltage on the connections so do take care :-)

  • bongopd 🇬🇧

    4 commentaires analysés

    r/reolinkcam · If The Company Went Dark

    Thank you so much for your response! Unfortunately, I think HTTP/HTTPS are default off when you take it out of the box and I think ONVIF is off too. I think if there were some way to both connect it to the wifi and then change those settings, that would be the answer, but I can't think of a way to do those.

    r/reolinkcam · If The Company Went Dark

    Okay, for you and the benefit of anyone else who comes here in the future (note that this is for the REOLINK Elite Floodlight WiFi), I turned off my phone's sim card and unplugged the internet at my house. I then cleared everything that was set up on my desktop and my phone for Reolink and I hit the reset button on the camera itself until it was yelling at me to set it up in the app. I then used the app on my phone to get the camera connected to wifi and controlled through the app. I then connected the camera to my desktop program through it's IP address, all entirely without internet. So, worst case scenario if the company went dark, we should just need a copy of the mobile app to set everything up, which I'm told in the above comments is available through other sources than just the company. Also, this all strongly suggests that it could be entirely reverse engineered and setup if needed (as you suggested). This convinces me beyond a doubt that these will not be bricked if the company goes under, which makes me much more comfortable with purchasing more. Thank you so much for your help!

    r/reolinkcam · If The Company Went Dark

    I can confirm that it does have a USB-C port and it does use bluetooth to connect. I was just unsure if it also had alternative methods. It is looking like it doesn't sadly.

    r/reolinkcam · If The Company Went Dark

    I'm trying to test this with a new REOLINK Elite Floodlight WiFi. Are you sure the QR code thing works with that model? It's very possible I'm doing something wrong, but I can't get it to work.

  • StarkillerTR 🇬🇧🌐

    4 commentaires analysés

    r/reolinkcam · Heads up the Elite Floodlight may not work at dusk in Close / motion only mode

    I know it is not ideal, but you could solve this using HomeAssistant. Just leave the floodlight off and make a automation in HA to turn on the floodlight whenever a person is detected. Then In the condition you can do whatever you like (specific timing, sunset/sunrise with offsets, alleviation angle of the sun, brightness using a light sensor (or your solor production if you have solor panels, basically the biggest light sensor you could image)). You can be as creative as you want in the conditions. I know this should have been easy and a basic feature in the firmware itself. But at least you have a alternative if you are willing to setup HA.

    r/reolinkcam · If The Company Went Dark

    Its possible withouth internet connection. You can generate the QR code yourself, instructions are here: https://www.home-assistant.io/integrations/reolink/#qr-code

  • cajunjoel 🇬🇧

    2 commentaires analysés

    r/reolinkcam · A couple questions before buying

    For 6 cameras, I'd recommend running cable to their locations. (and run more extra cables while you're there for future use.) The reliability and the fact that you can stream the highest quality video makes it worthwhile.

    r/reolinkcam · A couple questions before buying

    With four cameras, two on opposite corners, you will have blind spots under the cameras. Ideally, for a square or rectangular building, four cameras can cover all sides of the building with one on each corner. Like this Pic. https://preview.redd.it/mh3ie56mfukg1.jpeg?width=1300&format=pjpg&auto=webp&s=b7cde1da42d9fee9af572bc2a8c8f23e52eace98

  • shadowmage666 🇬🇧

    1 commentaire analysé

  • MintyRageCore 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink elite floodlight wifi initial setup error

    Oh I figured out my issue. I am trying to set it up stand alone with a sd card but I also have a NVR which had auto add on so it kept assigning it to my NVR after it connected to the WIFi. I turned off auto add and now it is working like it should

  • Electrical_Match3673 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink Elite Floodlight WiFi tripping circuit breaker

    I question how you have the light's ground (green and yellow) wire installed. It appears to be tied to a brown(?) wire via a wirenut. The Romex ground wire is bare and can be seen in the photo without obvious connection to the yellow/green as should exist. Brown is not a typical wire color in 120 circuits but can be discolored old white wire (going to the other lights?).

  • Zyke92 🇬🇧

    1 commentaire analysé

  • ako_si_panday 🇬🇧

    1 commentaire analysé

  • nuclear-experiment 🇬🇧

    2 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    https://preview.redd.it/r1qbltfxgu4g1.jpeg?width=2796&format=pjpg&auto=webp&s=e0e75c0b2038afa37dc946c85e13ec81ce46991c It keeps flashing on and off regardless of the camera angle, I’ve flipped the left light straight up so not to blast the white fence panel, still the same. I might have just gotten a lemon

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    The infrared lights are invisible, but after a series of the blinking fits an array of red lights appears around the lenses, looks like it’s indicating an error state. Blinding itself to a coma would be a big design flaw to be honest, I’m edging on returning it. Now it keeps reporting movement because the rain is quite heavy and the lights stay completely off, even though the mode is still always on at night

  • Sarcasmoverload007 🇬🇧

    5 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi

    I've said it here before about the lights but i think they come on too slow. Unless someone is crawling along the road like a snail it's ok, but if someone is loitering around between cars etc they need to switch on as soon as motion is detected. Not sure when they'll bring out an update either, because sometimes the camera is overly sensitive in my case and the lights won't stop switching on when nothing is there (my spotlights turn on for animals/people).

    r/reolinkcam · Tips on getting better person detection (Elite Floodlight)

    I'll take a screenshot tomorrow and upload it here. My main issue is it thinks cars are people, so massive chunks of motion during the day on the "person" tab is just cars going by with no people in sight. I also have 0 clue how to do the object size, as I can't find a video that explains it properly.

    r/reolinkcam · Tips on getting better person detection (Elite Floodlight)

    Unfortunately it's the WiFi Elite and it's obviously recording to a micro SD. My 811A on 40 sensitivity in general and 100 for people very rarely goes off in error, but I think that is because it's only looking at a small area. I might try turning off the "any motion" on the floodlight and keep it for people/cars to see what happens. It can behave weirdly though as sometimes it will not even notice a person right underneath it and it's counted as generic motion. Regarding object size I have a wall outside which makes the square size smaller when they walk past it according to the beta object setting that shows you what is going to be classed as motion. I'll have to keep trying different settings because it's tedious having cars set it off and it claims a car is a person🥲.

    r/reolinkcam · Elite Floodlight WiFi Review

    Someone else here mentioned the floodlights coming on too late and i agree with that. I've got a 2 second delay at night (due to how blinding the lights are on even on low brightness) and if someone walks past my house quickly you just see the back of them, then the lights come on. At least my Ring floodlights came on instantly when motion was detected, but as you say i hope they fix it in a new firmware update. Apart from that it's a good camera and hopefully a POE version is released.

  • PorkyBubs 🇬🇧

    1 commentaire analysé

  • PrettyAcanthisitta95 🇬🇧

    1 commentaire analysé

  • welshmatt 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    I've had mine Installed just over a week now, been looking for something since our home was broken into a few months back. I also had a full home alarm installed at the same time but wanted a visible deterrent on the rear of the house as well, and the floodlight would be useful in the winter when I am sorting out our recycling. I liked the idea of easy Installation and setup using an on board memory card. Tested it out and my only initial concern was the vertical vision, as I can't cover both my rear doors/windows and the top of my garden (which is not a very big space). Other than that it seemed to tick all the other boxes I had. I'm currently out of the country so tweaked the settings to only detect humans as we have loads of foxes, cats and birds that were setting it off all day and night. Then late 2 nights ago had 3 notifications in quick succession but couldn't see any movement anywhere in the videos. Since then it's been fine only going off when my mum went round to water plants.

  • 187hp 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    Thanks for the detailed write up! I agree regarding the pov, over a driveway - particularly two garages - this would be amazing, but the limited pov limits one's view to ask: do you want to see the garage door too or one car out into the driveway area. Hope to see more 120v cameras but agree, while I prefer poe wifi makes the most sense to launch with.

  • VivekMumbles 🇬🇧

    2 commentaires analysés

  • BLAKEdotIS 🇬🇧

    1 commentaire analysé

  • meowmick29 🇬🇧

    4 commentaires analysés

    r/reolinkcam · Setup Failure Elite Floodlight

    Glad this was helpful! I wasted money returning two Reolinks before they let me know it could be the USB. Maybe they should just provide it with the device if it’s so important 🤷‍♀️

    r/reolinkcam · Setup Failure Elite Floodlight

    After a lot of emails back and forth, it was the usb-c block adapter that wasn’t providing enough power. I had tried two already but it was a third block (5V, 3A) that provided enough power to enable set up. A little disappointed that they wouldn’t provide the adapter with the device or provide clearer troubleshooting if it’s so important to set up.

    r/reolinkcam · Setup Failure Elite Floodlight

    I followed the instructions and plugged the provided usb cord into an outlet and into the usb-c port in the floodlight. I hold down the reset button and the light on the camera turns blue. After holding it down for a while, the blue light turns off and on. No sound comes out. The YouTube video skips right past the reset step and sound voice prompt part then jumps right into pairing. When I try to do that, the app can’t find the device for Bluetooth pairing

  • Mental_Tradition_786 🇬🇧

    1 commentaire analysé

  • Joey-T99 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Help Reolink Elite Floodlight WiFi won’t connect during setup – “Device not found. Please move closer to the device”

    I don't have a clue how to help. But Google AI searches bring up all sorts of good stuff. Here is what I got after I copied and pasted your post into Google AI. [Google AI Answer](https://www.google.com/search?aep=11&udm=50&q=I%E2%80%99m+trying+to+help+my+granddad+set+up+his+new+Reolink+Elite+Floodlight+WiFi+camera%2C+but+we%E2%80%99re+completely+stuck+during+the+initial+setup.%0A%0AIn+the+Reolink+app%2C+it+gets+to+the+%E2%80%9CConnecting+Device%E2%80%9D+screen+and+then+says%3A%0A%0A%E2%80%9CDevice+not+found.+Please+move+closer+to+the+device+and+Retry.%E2%80%9D%0A%0AI%E2%80%99ve+already+tried+the+following%3A%0A%0APut+the+phone+right+next+to+the+camera+%28literally+inches+away%29.%0A%0ATurned+the+camera+off+for+1+minute+and+powered+it+back+on.%0A%0AWaited+for+the+camera+voice+prompt+before+trying+again.%0A%0AHeld+the+reset+button+for+8+seconds+until+it+beeped.+Also+tried+holding+the+reset+button+for+20+seconds.%0A%0ARestarted+my+phone.%0A%0ATried+using+a+completely+different+phone.+The+issue+persists+every+time.%0A%0ADisable+Local+Networks+with+Turning+my+NVR+off%0A%0AAt+this+point+I%E2%80%99m+wondering+if%3A%0A%0A*+The+camera%E2%80%99s+Bluetooth+module+is+faulty%3F%0A*+It%E2%80%99s+a+firmware+issue%3F%0A*+Or+there%E2%80%99s+something+else+I%E2%80%99m+missing+during+setup.%0A%0AHas+anyone+experienced+this+with+the+Elite+Floodlight+WiFi+or+know+of+a+fix%3F+Any+help+would+be+greatly+appreciated.&mstk=AUtExfAuAQAW061cMgFCpSQ7GXkTuutVA0zNNOozf6j8y_ZU9jqRRRMj0K-MSeoqyeEdUWtLvLfKVKJ1ja8B4hQ8bGN7o2kgStwxVayLh_K43GyBVcHmo7bgZH--TGX_F1WWInKte04VaC5wskfW68JJTLFH-f5gDIbeKE4&csuir=1) Based on how thoroughly you have already troubleshot the hardware, the problem is highly unlikely to be a faulty Bluetooth module or a firmware issue. Instead, it is almost certainly a **hidden phone OS permission blocking the Reolink app from initializing the Bluetooth handshake**, or an issue related to how the camera is drawing power. \[[1](https://support.reolink.com/articles/36804082197785-Fail-to-Setup-Reolink-Camera-via-Bluetooth/), [2](https://www.reddit.com/r/reolinkcam/comments/1uifst6/help_reolink_elite_floodlight_wifi_wont_connect/), [3](https://www.reddit.com/r/reolinkcam/comments/1k97i5q/cant_connect_to_duo_wifi_camera/)\] Because the [Reolink Elite Floodlight WiFi](https://www.google.com/search?ibp=oshop&prds=pvt:hg,pvo:29,imageDocid:11747025212517675134,gpcid:16802081929890556978,headlineOfferDocid:8286669902564109305,catalogid:5152538956451606049,productDocid:11119451321935501550,rds:PC_1119825092770720543%7CPROD_PC_1119825092770720543&q=product&sa=X&ved=2ahUKEwjs2Yfmgq2VAxXyHjQIHarvN8YQxa4PegYIAAgLEAI) utilizes a Bluetooth-first initialization process, standard Bluetooth settings screens are not enough. Follow these direct steps to fix the block. \[[1](https://www.youtube.com/watch?v=jzyxOYfAV9s&t=40), [2](https://support.reolink.com/articles/27920187894937-How-to-Configure-Wi-Fi-Connection-for-Reolink-Cameras-via-Bluetooth/), [3](https://support.reolink.com/articles/27920187894937-How-to-Configure-Wi-Fi-Connection-for-Reolink-Cameras-via-Bluetooth/)\] 1. Fix the "Hidden" OS Permissions (Most Likely Culprit) Even if Bluetooth is turned on in your phone's status bar, mobile operating systems require very strict, granular privacy permissions for apps to communicate with local smart home hardware. \[[1](https://support.reolink.com/articles/36804082197785-Fail-to-Setup-Reolink-Camera-via-Bluetooth/), [2](https://support.reolink.com/articles/27920187894937-How-to-Configure-Wi-Fi-Connection-for-Reolink-Cameras-via-Bluetooth/)\] * **For Android Users**: 1. Go to **Settings > Apps > Reolink**. 2. Tap **Permissions**. 3. Ensure **Nearby Devices** is explicitly set to **Allow**. *Without this, the app is physically blinded from seeing the camera's setup broadcast.* 4. Ensure **Location** is set to **Allow Only While Using the App** and that the toggle for **Use Precise Location** is turned **ON**. \[[1](https://support.reolink.com/articles/36804082197785-Fail-to-Setup-Reolink-Camera-via-Bluetooth/), [2](https://support.reolink.com/articles/27920187894937-How-to-Configure-Wi-Fi-Connection-for-Reolink-Cameras-via-Bluetooth/)\] * **For iOS (iPhone) Users**: 1. Go to **Settings > Privacy & Security > Bluetooth** and ensure the toggle next to **Reolink** is turned green. 2. Go to **Settings > Reolink** and verify that **Local Network** and **Bluetooth** are both toggled **ON**. \[[1](https://support.reolink.com/articles/24393333535001-What-to-Do-When-Having-Issues-with-Accessing-Reolink-Devices-on-a-Specific-Phone-PC/), [2](https://community.reolink.com/topic/9830/cameras-struggle-to-connect-from-phone-app-over-wifi-but-connect-from-cellular-almost-immediately), [3](https://support.reolink.com/articles/27920187894937-How-to-Configure-Wi-Fi-Connection-for-Reolink-Cameras-via-Bluetooth/), [4](https://support.reolink.com/articles/37800839552921-Managing-Alert-Events-for-Video-Loss-on-Reolink-Home-Hub-Series/), [5](https://community.reolink.com/topic/9830/cameras-struggle-to-connect-from-phone-app-over-wifi-but-connect-from-cellular-almost-immediately)\] 2. Verify the Power Supply Current If the camera is not receiving enough amperage during initialization, its wireless radios will intermittently crash or refuse to broadcast a setup beacon, even if the voice prompts and beeps seem to work. \[[1](https://www.reddit.com/r/reolinkcam/comments/1rxclej/setup_failure_elite_floodlight/), [2](https://www.reddit.com/r/reolinkcam/comments/1k97i5q/cant_connect_to_duo_wifi_camera/)\] * Ensure you are powering the camera using a **5V 2A (or higher) power adapter**. * Lower-powered phone charging blocks (like older 5V 1A Apple or generic cubes) do not provide enough sustained current to power both the floodlight's motherboard and its Bluetooth/Wi-Fi modules simultaneously during a boot cycle. \[[1](https://www.reddit.com/r/reolinkcam/comments/1rxclej/setup_failure_elite_floodlight/), [2](https://www.reddit.com/r/reolinkcam/comments/1k97i5q/cant_connect_to_duo_wifi_camera/)\] 3. Check for the Proper Hard Reset State Since you attempted both 8-second and 20-second resets, make sure you are seeing the specific visual trigger for this model: * When performing a factory reset, hold the button down until you hear the audio prompt or chime. * **Crucial Visual Check**: Look at the camera's small status LED indicator. It must be alternating or flashing between **Red and Blue**. If it is solid or dark, the camera has not successfully entered Bluetooth pairing mode. \[[1](https://support.reolink.com/articles/37836407256345-Troubleshooting-Guide-Resolving-Reolink-Floodlight-Offline-Issues/), [2](https://support.reolink.com/articles/15136426111641-How-to-Reset-Reolink-Floodlight/), [3](https://reolink.com/blog/reolink-floodlight-camera-not-working/?srsltid=AfmBOoofKG9Ljzi3-NW-nfc22OB9xhCPSucr2Y14MRSiAoS0RHLdDHdg), [4](https://support.reolink.com/articles/24139098919577-Troubleshooting-Guide-Reolink-Reset-Button-Not-Working/)\] 4. Bypass Bluetooth via the Wi-Fi AP Method If the app continues to hang on the Bluetooth "Connecting Device" screen, you can completely bypass the Bluetooth pairing handshake by forcing a direct Wi-Fi local connection: \[[1](https://support.reolink.com/articles/12713151213593-How-to-Initially-Set-up-Reolink-Floodlight-WiFi-via-Reolink-App/)\] 1. Completely close and swipe away the Reolink App. 2. Hard reset the camera one more time so it chimes. \[[1](https://support.reolink.com/articles/15136426111641-How-to-Reset-Reolink-Floodlight/)\] 3. Open your phone’s system **Wi-Fi Settings menu** (outside of the Reolink app). \[[1](https://support.reolink.com/articles/12713151213593-How-to-Initially-Set-up-Reolink-Floodlight-WiFi-via-Reolink-App/)\] 4. Look for a temporary network broadcasted by the camera itself, usually named something like **"Reolink\_Floodlight\_XXXX"** or **"Reolink\_Cam\_XXXX"**. \[[1](https://support.reolink.com/articles/12713151213593-How-to-Initially-Set-up-Reolink-Floodlight-WiFi-via-Reolink-App/)\] 5. Connect your phone directly to that temporary Wi-Fi network. \[[1](https://support.reolink.com/articles/12713151213593-How-to-Initially-Set-up-Reolink-Floodlight-WiFi-via-Reolink-App/)\] 6. Once connected, open the Reolink app. It should automatically discover the camera as an uninitialized local device, letting you type in your granddad's home Wi-Fi password to finish setup. \[[1](https://support.reolink.com/articles/12713151213593-How-to-Initially-Set-up-Reolink-Floodlight-WiFi-via-Reolink-App/), [2](https://support.reolink.com/articles/360006893253-Why-won-t-My-Security-Camera-Connect-to-My-Wi-Fi-Network/), [3](https://reolink.com/blog/reolink-floodlight-camera-not-working/?srsltid=AfmBOoofKG9Ljzi3-NW-nfc22OB9xhCPSucr2Y14MRSiAoS0RHLdDHdg)\] To narrow this down further, let me know: * Are you using an **Android or an iPhone** to set this up? * What **color or behavior** is the small status LED showing right now? * Is the camera currently plugged into an **outlet near the router**, or is it already mounted outside?

  • sharp-calculation 🇬🇧

    1 commentaire analysé

    r/reolinkcam · 24/7 NVR recording over Wi-Fi Wired Camera?

    I see. Why is it hard to get POE there? It this location half way up the wall, and thus not near the attic/roof? Be aware of the overall height of the camera location. Even for an overview camera like this one, too high isn't good. It moves you far from what's going on, thus reducing how much you will see and making angles a lot worse. Ideal height is 8 feet or so. Not much higher. Best of luck!

  • Known-Advisor-2000 🇬🇧

    1 commentaire analysé

    r/reolinkcam · 24/7 NVR recording over Wi-Fi Wired Camera?

    Nope, you guessed my situation wrong. The ideal spot for one of my cameras is where I already have an AC-hardwired floodlight. It's mounted on the exterior wall of a finished two-story house, so running Ethernet there would be a significant hassle. Replacing the existing floodlight with a Wi-Fi hardwired camera, on the other hand, is basically plug-and-play. The rest of my cameras are PoE. This is just the one location where a Wi-Fi camera makes much more sense

  • Amazing_Armadillo429 🇬🇧🌐

    7 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi floodlights flashing when motion detected

    I also do not have that option, lol. I have Settings > Light > Floodlight > Close, Auto Mode, Always On at Night, Timer Mode and Brightness. Under Settings > Notification Settings I have Push Notifications, Email Alerts, FTP, Siren, Home Hub Siren. Per the article I linked there should be a Light Alert option under Notification Settings which controls the strobing. I do not not have that option.

  • andrewmh123 🇬🇧

    2 commentaires analysés

    r/reolinkcam · Troubleshooting Elite WiFi - Cannot Connect to WiFi (Used to be Okay)

    I have. There was a bit more troubleshooting and Reolink ended up sending me a new device. I am waiting on the arrival. In case anyone else is wondering what the other steps they asked me to perform: Provide the error message exactly as it appears Connect everything to the main router (I unplugged the nodes to make sure they were not interfering)

  • Funny_Net4186 🇬🇧

    1 commentaire analysé

  • caponewgp420 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink Elite Floodlight WiFi

    I replaced the three floodlights on my house with these and really like them. My wife hates that the light switch can’t be used anymore. I bought a few Shelly1s but haven’t figured out how to wire yet.

  • ChapterSalt1453 🇬🇧

    1 commentaire analysé

  • xSimoHayha 🇬🇧

    1 commentaire analysé

  • miclordz 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink Elite Floodlight WiFi

    I haven't had any issues so far. It sometimes takes a second or two to load up but not a major issue. It's been sufficient for my needs. I know running an ethernet cabel to most places can be a pain tho it's the superior option. They do well for what they are

  • 250Falcon 🇬🇧

    1 commentaire analysé

  • Henryx3000 🇬🇧

    1 commentaire analysé

  • FootstepsFalco21 🇬🇧

    6 commentaires analysés

    r/reolinkcam · Help with Initial Setup

    So I went to connect the cameras to the nvr this morning and they were all disconnected in the app. I couldn’t get them to reconnect, so I removed them all from the app. Now, when adding the cameras back and resetting, the cameras don’t beep and connect. So I’m back at square one. Just gonna have the electricians put them in and I’ll do it all on a ladder I guess

    r/reolinkcam · Help with Initial Setup

    Sir or madam, you are a champion. Thank you SO much for your assistance. I’m going to try and add all the cameras to the nvr tonight before the install tomorrow. I hope everyone sees this thread because everything you’ve outlined has worked flawlessly. Thanks again

    r/reolinkcam · Help with Initial Setup

    Not sure you’ll see this, but I have electricians coming to install all of the cameras. I was able to successfully get them all connected to my eero network and added to the app! Thanks for your help. I just want to confirm, should I wait for the cameras to be fully installed before adding them to the nvr? Or can I add them to the nvr now?

    r/reolinkcam · Help with Initial Setup

    Just seeing your comment here. Did you get it figured out? I’m slowly working through the setup (have had to focus on other projects), but I’ve made some progress. I was able to add my 3 floodlights to the Reolink app, and I’m going to attempt to add my doorbell later today. So far, the other commenter on this thread provided great instructions that have worked perfectly. I’d recommend starting there!

    r/reolinkcam · Help with Initial Setup

    So I only tested one of the flood lights and then had to pack it all up (foolishly tried setting this all up before a work trip). The light powered on with the usbc port luckily, so I’m really hoping that’ll be a sufficient way to power it for the initial setup phase. It just wasn’t resetting properly (atleast, from what I could tell).

    r/reolinkcam · Help with Initial Setup

    Thank you very much for this! I’ll try this on Friday when I’m home from a work trip. My only concern now is with the one floodlight I tried to add to the app (when resetting the floodlight, no voice prompt played). Hoping I don’t have a dud.

  • dg8882 🇬🇧

    1 commentaire analysé

  • Vinny_Gambini 🇬🇧

    1 commentaire analysé

  • Fluffywings 🇬🇧

    1 commentaire analysé

  • Ok-Profit3437 🇬🇧

    1 commentaire analysé

  • lars2k1 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    Good to know. Since I'm moving out I will be removing the cameras I placed around my parents' house (more so because the network setup is jank and centralized from the shed, which will be partly rebuilt or demolished) I'd rather have something that surely can always be viewed (the current setup works, but if there's issues they cannot fix it), so some proper wifi cams are nice to have. Thanks for testing that! I'll be getting one of these then.

  • Ceo-4eva 🇬🇧

    1 commentaire analysé

  • livingwaterRed 🇬🇧

    2 commentaires analysés

    r/reolinkcam · Setup Failure Elite Floodlight

    Maybe LifeHackster video will help, but he doesn't do it by Bluetooth, he scannded the QR code: [https://www.youtube.com/watch?v=mLxSqVZ8c0I](https://www.youtube.com/watch?v=mLxSqVZ8c0I)

    r/reolinkcam · Setup Failure Elite Floodlight

    Likely not the cam being defective, you are doing something wrong trying to set it up. Watch Youtube channel LifeHackster, he reviews Reolink and other brands, shows how to set up cams in the app.

  • eyedea32 🇬🇧

    1 commentaire analysé

  • SnooPuppers8698 🇬🇧

    1 commentaire analysé

  • Illeazar 🇬🇧

    1 commentaire analysé

  • Tsara1234 🇬🇧

    3 commentaires analysés

  • DigitalDeceiver 🇬🇧

    3 commentaires analysés

    r/reolinkcam · Elite Floodlight WIFI

    I won't be buying another camera either, seems like there is a dumbing down of functionality. Unless of course they fix it via firmware update or something.

    r/reolinkcam · Elite Floodlight WIFI

    yeah, hence why I checked there first, then tried the share camera functionality. Big shame on Reolink for doing this. Even Tapo with the much more basic cameras allows for user management...

  • eric--cartman 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WIFI

    This is very disappointing, of course I'm not buying another camera lacking this feature. All my other ~20 cameras from them have user management, this was quite surprising. I also wasn't able to share my elite with another person using the app on android. Seems to me like a very weird decision from reolink to remove basic functionality.

  • bruisedpantherfan 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi

    Just incase anyone else is experiencing this issue, I found that my hardware was not included in the download lists for updates. I had to contact Reolink support and they pushed the update to my device.

  • hiroshimacc 🇬🇧

    3 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi mic suddenly stopped working

    I tried disabling/enabling audio recording, changing/disabling noise reduction, nothing. I did try to clean the mic hole with a small brush, no sound, but then used an air can to blew it clean and could hear the sound of the air pushing through in the playback, but that's it. I guess it's dead.

  • Terratree_AU 🇬🇧

    1 commentaire analysé

  • _mnr 🇬🇧

    1 commentaire analysé

  • RJM_50 🇬🇧

    1 commentaire analysé

  • bradcrittenden 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Reolink Elite Floodlight WiFi tripping circuit breaker

    The Romex sheath does enter the box and it has duck seal putty around it. Originally the box was mounted at an angle, I had to remount it to make it level for the camera mounts. Perhaps that remounting disturbed the putty and it needs to be redone. However, removing the camera completely eliminates the trips. If there was water in the Romex then the circuit would continue to trip I’d think. Would Teflon tape around the plugs be sufficient to seal them up? Thanks for the suggestions.

  • layered-venato 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Incorrect Hardware Number on New Elite Floodlight WiFi

    Posted the same in another subreddit: I’m also in the same boat. I’ve got the 18 and not the 15. Purchased directly from Reolink and am in Australia if that matters. Interestingly, I haven’t noticed a slow floodlight switch on time. How slow are we talking? Instead, my issue is that my Elite Floodlight WiFi didn’t automatically reconnect to my WiFi after I had to power cycle my router. Left it for the whole night and it was still disconnected the next day (my other Reolink cams came back online in minutes). Has that happened to any of you?

  • futurechan 🇬🇧

    1 commentaire analysé

  • Idahoroaminggnome 🇬🇧

    1 commentaire analysé

  • GrossmeisterT 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    Very detailed and helpful review, thank you! I also have this camera for a while and I honestly love it. The design isn't the most attractive, that's true, but it serves its purpose perfectly. It also integrates wonderfully with Home Assistant (and somehow in Synology Surveillance Station). What I noticed with the current firmware v3.2.0.5607\_2511041996 is that the camera switches to day view significantly later and to night view significantly earlier than with the previous firmware. I compared it with a low-budget camera that is also in use here. With the previous firmware, both cameras switched to night mode at pretty much the same time. To confirm this, I reinstalled the previous firmware and you can clearly see the difference. I am in contact with Reolink support and hope they will fix the problem with the next version.

  • Acceptable-Dust-4515 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    I have this camera and do like it. Why do I not have the options I see listed such as light colors and spotlight detection. I cannot set mine to turn on spotlights when someone walks in front of the camera. I have four options for the lights and they are all worthless to me, see below. I am using a home hub and I thought I read that you lose some features using it. Is that true? https://preview.redd.it/utn5rago075g1.png?width=1125&format=png&auto=webp&s=2ba26adf1914168c21693a92a0058b740e86ef54

  • Pyxios 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    Hi, I just started using HomeAssistant and I'm curious as to how your automation looks for the floodlights. I'm also trying to have it turn the floodlights on when it detects people, but it doesn't seem to be working.

  • damedash29 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi: blinking, red lights

    This happened to me - I believe it’s a known issue. Go into settings > display > change the setting to ‘color’ or black & white” instead of auto. This fixed the blink for ‘always on at night’ as well motion detection which was not working for me when the floodlight was in ‘auto’ mode.

  • wojtekadams 🇬🇧

    1 commentaire analysé

  • PonderSquirrel 🇬🇧

    1 commentaire analysé

  • xfallen 🇬🇧

    1 commentaire analysé

  • Nova_Nightmare 🇬🇧

    3 commentaires analysés

    r/reolinkcam · Elite Floodlight Camera Wi-Fi question

    My hardware ID has an 18 instead of the 15 that shows on the website. IPC_NT18NA68MPW, no firmware update apparently - what I thought was for mine only gave wrong file type errors. Searching the hardware ID has someone saying there's no update for it.

    r/reolinkcam · Elite Floodlight Camera Wi-Fi question

    Yes, it just refuses - however the camera doesn't allow login to its web portal either. The credentials only work in the app and Windows app. This was why I am asking if it needs full power to enable http / onvif login. Currently trying to make sure it works before hardwiring it in. If it needs full power, fine, if not I want it working before I take down the Ring Floodlight.

  • rastasize 🇬🇧

    1 commentaire analysé

  • englishbreakfast3 🇬🇧

    1 commentaire analysé

  • Apprehensive_Win292 🇬🇧

    1 commentaire analysé

  • Superb-Deal8592 🇬🇧

    2 commentaires analysés

  • ohpico 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight: lights don't turn on when detecting motion at night.

    I just got these and here are my settings for floodlight. Floodlight: Spotlight > On Detection > People, Vehicles Continuous Flashing > Off Stay On > On Light Duration > 1 Minute Brightness > ~40% Display: Day and Night > Auto Light: Floodlight > Close Infared Lights > Auto Detection Alarm: Various changes to settings and sensitivity Also, it depends on how far the person is. The specs for the IR is up to 30m (100ft). I've found that you really need to have the IR on at night to help with the detection.

  • BikesAndBBQ 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    I'm in the same boat right now. I have the Duo 2 PoE Floodlight on order intending to replace a Google Nest Floodlight cam so I can get more reliable video recording without dropouts. My main concern is the floodlight itself, the Duo 2 floodlight is 1800 lumens, which is a step down from the Nest's 2400 lumens. I think I'd prefer the brighter 3000 lumen floodlights on the Elite but I'm worried that staying WiFi will mean I still get the same video dropouts I get from my Nest cam. (Though that problem may be that I \_think\_ I'm going out to the internet to get the stream from my Nest cam into Frigate, maybe WiFi and a pure local stream will be good enough.) What do you think of the Duo flood? Does it feel bright enough to you?

  • SpellAccomplished687 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi

    I have a ticket open with Reolink sent all screenshots and a detailed description of the issue. My thought they will pass the buck and basically I don’t know? I figured out a work around next time the light doesn’t turn on @ night I will change the mode to set timer mode from 7pm to 6am. I’m sure if it’s a wide issue a firmware update will resolve but who knows if that will happen soon? Thanks to everyone with replies and suggestions:)

  • ShinyTechThings 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite floodlight wiring question

    The main thing is that the wires should match up the color code and the one I received as a review unit came with that cord. Then you just twist the wires together and use the supplied Wing nuts. What I didn't know until I was filming was that the App will walk you through the physical installation which is pretty cool. Also, you can plug in a USBC power cable beforehand to pre-configure it on your network. [Here](https://youtu.be/9Jyd2KeRgkQ) is the review and installation video if you would like to check it out. One other quick tip is there is a hook on the wall mount that the camera can hang from while you are connecting the wires for power.

  • kinisonkhan 🇬🇧

    1 commentaire analysé

  • pig_newton1 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    Thanks sounds flexible enough. I don’t really have a need for a floodlight but this seems like the only wifi camera available right now with a very wide angle and a high resolution

  • ElectronicBruce 🇬🇧

    1 commentaire analysé

  • Big-Sweet-2179 🇬🇧

    1 commentaire analysé

  • QH96 🇬🇧

    1 commentaire analysé

    r/reolinkcam · Elite Floodlight WiFi Review

    Given it looks like a Argus 4 pro, they should have given it a 1/1.8 sensor allowing ColorX. Even though the spotlights are powerful, it would have been nice to have permanent colour mode. Also I wish they gave it a 60 degree or more vertical FOV.

  • chindizzle 🇬🇧

    2 commentaires analysés

    r/reolinkcam · Elite Floodlight WiFi Review

    Yeah I do agree on Ring I just sorted tossed it in but would love to see some comparisons vs hikvision or annke. A lot of the reviews coming out seem like influencer got for free reviews. They highlight the features but I hadn’t seen one discuss price or any real comparisons. Is the high current price due to tariffs factored in? I’m hoping it goes for $170-180 when it goes for sale after it’s released cause nearly $250 after taxes is honestly a lot for camera hardware with features that are similar to much cheaper duos. Duo floodlight drops to $130 on sale frequently. I do love the design of the new one but will prob wait a bit to see if price drops.

    r/reolinkcam · Elite Floodlight WiFi Review

    A lot of reviews coming out on the elite WiFi floodlight. I was interested in swapping out my duo floodlight for it til the price was announced. The biggest con for me is price. $220 is almost twice the cost of the duo 2 floodlight which often goes on sale. Also over twice the cost of the ring floodlight camera. I’d also like to see the comparisons against other brands floodlight cams. Maybe something that justifies the $220 price tag

  • HollyFredD 🇬🇧

    2 commentaires analysés

    r/reolink · Reolink Elite Floodlight WiFi (Hardwired) - pink video

    No extension cord in my two boxes. I agree that the overall feeling about this new camera is mixed. The form factor, the 180°c, the hardwire and the floodlights ... it's just the dreamy camera for me. Everything I was expected. But the software, the random pinkish USB-C problem and the fact that my first RMA request went through is telling me that even at support level they were not really aware of it until recently. Anyway, now everything's setup, overall it's ok but I still miss : \- ability to change the temperature of the light (only the brightness so far) \- better control over the auto-light feature (only for humans for example)

    Extérieur
  • me2ne 🇬🇧

    1 commentaire analysé

  • FaithlessnessSame357 🇬🇧

    1 commentaire analysé

    r/gadgets · Reolink Elite Floodlight WiFi Review: A Top-Tier Light and Security Camera

    No integration with HomeKit, Alexa, or Google Home = no dice. I get it that the focus here is local storage, granular control, RTSP, but if you have to exclusively live in the Reolink universe or be technical enough to use Scrypted to get full use, this doesn’t really qualify as “top tier”, it’s a niche device at best.

    DomotiqueStockage local
  • Tech-Dude-In-TX 🌐

    1 commentaire analysé

  • Charming-Sign-576 🌐

    1 commentaire analysé

  • lantech 🌐

    1 commentaire analysé

Souvent comparé à

Questions fréquentes

Fonctionne-t-elle sans abonnement ?

Oui, les utilisateurs Reddit rapportent un enregistrement local sur carte SD et un accès par le réseau local, sans connexion Internet. Des interfaces comme HTTP, RTSP et ONVIF sont également mentionnées, mais leur activation demande quelques réglages.

La détection nocturne est-elle réactive ?

Le consensus Reddit est mitigé. Plusieurs utilisateurs constatent un retard d’allumage ou une absence de déclenchement en présence d’un éclairage ambiant, tandis que des mises à jour récentes améliorent nettement la réaction chez certains.

L’installation est-elle facile ?

Le remplacement d’un projecteur câblé existant est généralement jugé simple, avec guidage dans l’application et crochet de maintien. La configuration préalable par USB-C peut cependant échouer si l’adaptateur ne fournit pas assez de puissance, et l’absence de port Ethernet limite le dépannage.

La qualité d’image est-elle bonne la nuit ?

Les avis Reddit soulignent une image nocturne lumineuse et une couverture horizontale large. Ils critiquent toutefois le champ vertical limité, le grain dans certaines comparaisons et le risque de flou ou de surexposition sur les sujets en mouvement.